Component: Air Quality (BME680) (BME680) (Environmental)
From Flowcode Help
Jump to navigationJump to search| Author | Matrix TSL |
| Version | 1.0 |
| Category | Environmental |
Contents
Air Quality (BME680) component
A low power sensor capable of measuring air quality, pressure, temperature and humidiy. Connected to microcontroller using either I2C or SPI communications bus.
Component Source Code
Please click here to download the component source project: FC_Comp_Source_Pressure_and_Air_BME680.fcfx
Please click here to view the component source code (Beta): FC_Comp_Source_Pressure_and_Air_BME680.fcfx
Detailed description
No detailed description exists yet for this component
Examples
No additional examples
Macro reference
|
Initialise |
 - VOID
|
Return |
Property reference
|
Properties |
|
Comms Type |
|
Simulate Comms |
| Allows the communications to be simulated to allow for data to be sent via injector components, | |
|
I2C Comms |
|
|
Channel |
| Channel selection | |
|
|
SDO Address Pin |
| The SDO pin specifies the least significant bit of the device address. | |
|
SDA |
| Pin used for SDA (data signal) | |
|
|
SCL |
| Pin used for SCL (clock signal) | |
|
|
Baud Select |
| Baud rate option selector | |
|
Baud Rate |
| Baud rate to be used | |
|
|
Sensor Configuration |
|
|
Humidity Oversampling |
| Controls the humidity oversampling setting | |
|
|
Temperature Oversampling |
| Controls the temperature oversampling setting | |
|
|
Pressure Oversampling |
| Controls the pressure oversampling setting | |
|
|
IIR Filter |
| Controls the filter coefficient used on the temperature and pressure data | |
|
|
Gas Wait Time |
| Gas sensor wait time multiplication factor | |
==Macro reference==
|
|
Initialise |
| - VOID
|
Return |
Property reference
|
|
Properties |
|
|
Comms Type |
|
|
Simulate Comms |
| Allows the communications to be simulated to allow for data to be sent via injector components, | |
|
|
I2C Comms |
|
|
Channel |
| Channel selection | |
|
|
SDO Address Pin |
| The SDO pin specifies the least significant bit of the device address. | |
|
|
SDA |
| Pin used for SDA (data signal) | |
|
|
SCL |
| Pin used for SCL (clock signal) | |
|
|
Baud Select |
| Baud rate option selector | |
|
|
Baud Rate |
| Baud rate to be used | |
|
|
Sensor Configuration |
|
|
Humidity Oversampling |
| Controls the humidity oversampling setting | |
|
|
Temperature Oversampling |
| Controls the temperature oversampling setting | |
|
|
Pressure Oversampling |
| Controls the pressure oversampling setting | |
|
|
IIR Filter |
| Controls the filter coefficient used on the temperature and pressure data | |
|
|
Gas Wait Time |
| Gas sensor wait time multiplication factor | |
==Macro reference==
|
|
Initialise |
| - VOID
|
Return |
Property reference
|
|
Properties |
|
|
Comms Type |
|
|
Simulate Comms |
| Allows the communications to be simulated to allow for data to be sent via injector components, | |
|
|
I2C Comms |
|
|
Channel |
| Channel selection | |
|
|
SDO Address Pin |
| The SDO pin specifies the least significant bit of the device address. | |
|
|
SDA |
| Pin used for SDA (data signal) | |
|
|
SCL |
| Pin used for SCL (clock signal) | |
|
|
Baud Select |
| Baud rate option selector | |
|
|
Baud Rate |
| Baud rate to be used | |
|
|
Sensor Configuration |
|
|
Humidity Oversampling |
| Controls the humidity oversampling setting | |
|
|
Temperature Oversampling |
| Controls the temperature oversampling setting | |
|
|
Pressure Oversampling |
| Controls the pressure oversampling setting | |
|
|
IIR Filter |
| Controls the filter coefficient used on the temperature and pressure data | |
|
|
Gas Wait Time |
| Gas sensor wait time multiplication factor | |
