Component: API I2C Dummy (API Slave Devices)
From Flowcode Help
Jump to navigationJump to search| Author | Matrix TSL |
| Version | 2.0 |
| Category | API Slave Devices |
Contents
API I2C Dummy component
API I2C Dummy
Component Source Code
Please click here to download the component source project: FC_Comp_Source_API_I2C_Dummy.fcfx
Please click here to view the component source code (Beta): FC_Comp_Source_API_I2C_Dummy.fcfx
Detailed description
No detailed description exists yet for this component
Examples
No additional examples
Macro reference
|
I2CInitialise |
| Initialsie the I2C module ready for communications | |
 - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
Baud |
| 0=100KHz, 1=400KHz, 2=1MHz | |
 - VOID
|
Return |
|
|
I2CTransReceive |
| Receives an I2C Transaction on the selected I2C channel. Returns the number of bytes received. | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
Data |
| Data variable to receive into | |
 - UINT
|
Count |
| Number of bytes to receive | |
| - UINT
|
Return |
|
|
I2CRestart |
| Put the I2C Module into Restart mode | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - VOID
|
Return |
|
|
I2CStart |
| Put the I2C Module into Start mode | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - VOID
|
Return |
|
|
I2CReceive |
| Receive a byte using the I2C bus | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
 - BOOL
|
Last |
| Last byte to receive: Range 0-1 | |
| - BYTE
|
Return |
|
|
I2CStop |
| Put the I2C Module into Stop mode | |
| - BYTE
|
Channel |
| - VOID
|
Return |
|
|
I2CTransSend |
| Sends an I2C Transaction on the selected I2C channel. Returns the number of bytes sent. | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
Data |
| Data to send | |
| - UINT
|
Count |
| Number of bytes to send out, MS bit 0x8000 signifies no Stop if set | |
| - UINT
|
Return |
|
|
I2CTransInit |
| Initialises the I2C Transaction mode with the 7-bit device address | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
DeviceAddress |
| 7-bit Device Address | |
| - BYTE
|
Baud |
| 0=100KHz, 1=400KHz, 2=1MHz | |
| - VOID
|
Return |
|
|
I2CSend |
| Transmit a byte using the I2C bus | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
DataOut |
| - BOOL
|
Return |
|
|
Initialise |
| Initialise the comms to the Arduino board ready for commands to be sent. | |
| - VOID
|
Return |
Property reference
|
Properties |
==Macro reference==
|
|
I2CInitialise |
| Initialsie the I2C module ready for communications | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
Baud |
| 0=100KHz, 1=400KHz, 2=1MHz | |
| - VOID
|
Return |
|
|
I2CTransReceive |
| Receives an I2C Transaction on the selected I2C channel. Returns the number of bytes received. | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
Data |
| Data variable to receive into | |
| - UINT
|
Count |
| Number of bytes to receive | |
| - UINT
|
Return |
|
|
I2CRestart |
| Put the I2C Module into Restart mode | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - VOID
|
Return |
|
|
I2CStart |
| Put the I2C Module into Start mode | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - VOID
|
Return |
|
|
I2CReceive |
| Receive a byte using the I2C bus | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BOOL
|
Last |
| Last byte to receive: Range 0-1 | |
| - BYTE
|
Return |
|
|
I2CStop |
| Put the I2C Module into Stop mode | |
| - BYTE
|
Channel |
| - VOID
|
Return |
|
|
I2CTransSend |
| Sends an I2C Transaction on the selected I2C channel. Returns the number of bytes sent. | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
Data |
| Data to send | |
| - UINT
|
Count |
| Number of bytes to send out, MS bit 0x8000 signifies no Stop if set | |
| - UINT
|
Return |
|
|
I2CTransInit |
| Initialises the I2C Transaction mode with the 7-bit device address | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
DeviceAddress |
| 7-bit Device Address | |
| - BYTE
|
Baud |
| 0=100KHz, 1=400KHz, 2=1MHz | |
| - VOID
|
Return |
|
|
I2CSend |
| Transmit a byte using the I2C bus | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
DataOut |
| - BOOL
|
Return |
|
|
Initialise |
| Initialise the comms to the Arduino board ready for commands to be sent. | |
| - VOID
|
Return |
Property reference
|
|
Properties |
==Macro reference==
|
|
I2CInitialise |
| Initialsie the I2C module ready for communications | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
Baud |
| 0=100KHz, 1=400KHz, 2=1MHz | |
| - VOID
|
Return |
|
|
I2CTransReceive |
| Receives an I2C Transaction on the selected I2C channel. Returns the number of bytes received. | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
Data |
| Data variable to receive into | |
| - UINT
|
Count |
| Number of bytes to receive | |
| - UINT
|
Return |
|
|
I2CRestart |
| Put the I2C Module into Restart mode | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - VOID
|
Return |
|
|
I2CStart |
| Put the I2C Module into Start mode | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - VOID
|
Return |
|
|
I2CReceive |
| Receive a byte using the I2C bus | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BOOL
|
Last |
| Last byte to receive: Range 0-1 | |
| - BYTE
|
Return |
|
|
I2CStop |
| Put the I2C Module into Stop mode | |
| - BYTE
|
Channel |
| - VOID
|
Return |
|
|
I2CTransSend |
| Sends an I2C Transaction on the selected I2C channel. Returns the number of bytes sent. | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
Data |
| Data to send | |
| - UINT
|
Count |
| Number of bytes to send out, MS bit 0x8000 signifies no Stop if set | |
| - UINT
|
Return |
|
|
I2CTransInit |
| Initialises the I2C Transaction mode with the 7-bit device address | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
DeviceAddress |
| 7-bit Device Address | |
| - BYTE
|
Baud |
| 0=100KHz, 1=400KHz, 2=1MHz | |
| - VOID
|
Return |
|
|
I2CSend |
| Transmit a byte using the I2C bus | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
DataOut |
| - BOOL
|
Return |
|
|
Initialise |
| Initialise the comms to the Arduino board ready for commands to be sent. | |
| - VOID
|
Return |
Property reference
|
|
Properties |
==Macro reference==
|
|
I2CInitialise |
| Initialsie the I2C module ready for communications | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
Baud |
| 0=100KHz, 1=400KHz, 2=1MHz | |
| - VOID
|
Return |
|
|
I2CTransReceive |
| Receives an I2C Transaction on the selected I2C channel. Returns the number of bytes received. | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
Data |
| Data variable to receive into | |
| - UINT
|
Count |
| Number of bytes to receive | |
| - UINT
|
Return |
|
|
I2CRestart |
| Put the I2C Module into Restart mode | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - VOID
|
Return |
|
|
I2CStart |
| Put the I2C Module into Start mode | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - VOID
|
Return |
|
|
I2CReceive |
| Receive a byte using the I2C bus | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BOOL
|
Last |
| Last byte to receive: Range 0-1 | |
| - BYTE
|
Return |
|
|
I2CStop |
| Put the I2C Module into Stop mode | |
| - BYTE
|
Channel |
| - VOID
|
Return |
|
|
I2CTransSend |
| Sends an I2C Transaction on the selected I2C channel. Returns the number of bytes sent. | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
Data |
| Data to send | |
| - UINT
|
Count |
| Number of bytes to send out, MS bit 0x8000 signifies no Stop if set | |
| - UINT
|
Return |
|
|
I2CTransInit |
| Initialises the I2C Transaction mode with the 7-bit device address | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
DeviceAddress |
| 7-bit Device Address | |
| - BYTE
|
Baud |
| 0=100KHz, 1=400KHz, 2=1MHz | |
| - VOID
|
Return |
|
|
I2CSend |
| Transmit a byte using the I2C bus | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - I2C Bus Count - 1 | |
| - BYTE
|
DataOut |
| - BOOL
|
Return |
|
|
Initialise |
| Initialise the comms to the Arduino board ready for commands to be sent. | |
| - VOID
|
Return |
Property reference
|
|
Properties |
