Component: API UART Dummy (API Slave Devices)
| Author | Matrix TSL |
| Version | 2.0 |
| Category | API Slave Devices |
API UART Dummy component
Connects to an Arduino Mega running the API Firmware allowing the board to become a slave to the Flowcode Embedded simulation or Flowcode App Developer. Supports: Digital IO / ADC / I2C / SPI / UART / PWM See Flowcode Help Wiki for firmware.
Component Source Code
Please click here to download the component source project: FC_Comp_Source_API_UART_Dummy.fcfx
Please click here to view the component source code (Beta): FC_Comp_Source_API_UART_Dummy.fcfx
Detailed description
No detailed description exists yet for this component
Examples
No additional examples
Macro reference
UARTBaud
|
UARTBaud |
| Control the communications rate of the UART module | |
 - BYTE
|
Channel |
| Channel Index: Range 0 - UART Bus Count - 1 | |
| - BYTE
|
Rate |
| 0=1200, 1=2400, 2=4800, 3=9600, 4=19200, 5=38400, 6=57600, 7=115200 | |
 - VOID
|
Return |
UARTCheckRX
|
|
UARTCheckRX |
| Check to see if the UART module has received any data | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - UART Bus Count - 1 | |
| - BYTE
|
Return |
UARTInitialise
|
|
UARTInitialise |
| Initialise the UART module ready for communications | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - UART Bus Count - 1 | |
| - VOID
|
Return |
IOSetOutputPin
|
|
IOSetOutputPin |
| Sets the selected digital pin to an output and assigns the output state. | |
| - BYTE
|
Pin |
| Range: 0-53 | |
 - BOOL
|
State |
| Range: 0-1 | |
| - VOID
|
Return |
IOGetInputPin
|
|
IOGetInputPin |
| Sets the selected digital pin to an input and reads the input state. | |
| - BYTE
|
Pin |
| Range: 0-19 | |
| - BOOL
|
Return |
UARTReceive
|
|
UARTReceive |
| Receives a data byte from the UART. Recommend calling the UARTCheckRx function first to ensure data is available. | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - UART Bus Count - 1 | |
| - BYTE
|
Return |
UARTSend
|
|
UARTSend |
| Send a byte via the UART module | |
| - BYTE
|
Channel |
| Channel Index: Range 0 - UART Bus Count - 1 | |
| - BYTE
|
Data |
| Data Byte to send. Range: 0-255 | |
| - VOID
|
Return |
Initialise
|
|
Initialise |
| Initialise the comms to the Arduino board ready for commands to be sent. | |
| - VOID
|
Return |
Property reference
|
Properties |