Component: TTI TG5011 Signal Generator (TG5011) (Test Equipment)
From Flowcode Help
Jump to navigationJump to searchAuthor | Matrix TSL |
Version | 0.2 |
Category | Test Equipment |
Contents
- 1 TTI TG5011 Signal Generator component
- 2 Component Source Code
- 3 Detailed description
- 4 Examples
- 5 Macro reference
- 5.1 ADDRESSRet
- 5.2 AMPL
- 5.3 AMPLRNG
- 5.4 AMPUNIT
- 5.5 ARB1
- 5.6 ARB1DEFRet
- 5.7 ARB1Ret
- 5.8 ARB2
- 5.9 ARB2DEFRet
- 5.10 ARB2Ret
- 5.11 ARB3
- 5.12 ARB3DEFRet
- 5.13 ARB3Ret
- 5.14 ARB4
- 5.15 ARB4DEFRet
- 5.16 ARB4Ret
- 5.17 ARBDCOFFS
- 5.18 ARBDEF
- 5.19 ARBLOAD
- 5.20 ARBRESIZE
- 5.21 BEEP
- 5.22 BEEPMODE
- 5.23 BST
- 5.24 BSTCOUNT
- 5.25 BSTPER
- 5.26 BSTPHASE
- 5.27 BSTTRGPOL
- 5.28 BSTTRGSRC
- 5.29 CALADJ
- 5.30 CALIBRATION
- 5.31 CALSTEP
- 5.32 CALVALRet
- 5.33 CLKSRC
- 5.34 CLKSRRet
- 5.35 CLS
- 5.36 DCOFFS
- 5.37 EERRet
- 5.38 ESE
- 5.39 ESERet
- 5.40 ESESet
- 5.41 ESRRet
- 5.42 FREQ
- 5.43 HILVL
- 5.44 IDNRet
- 5.45 ISTRet
- 5.46 LOCAL
- 5.47 LOCKMODE
- 5.48 LOLVL
- 5.49 LRN
- 5.50 LRNRet
- 5.51 MOD
- 5.52 MODAMDEPTH
- 5.53 MODAMFREQ
- 5.54 MODAMSHAPE
- 5.55 MODAMSRC
- 5.56 MODFMDEV
- 5.57 MODFMFREQ
- 5.58 MODFMSHAPE
- 5.59 MODFMSRC
- 5.60 MODFSKRATE
- 5.61 MODFSKSRC
- 5.62 MODHOPFREQ
- 5.63 MODPMDEV
- 5.64 MODPMFREQ
- 5.65 MODPMSHAPE
- 5.66 MODPMSRC
- 5.67 MODPOLFSK
- 5.68 MODPWMDEVSYM
- 5.69 MODPWMDEVWDT
- 5.70 MODPWMFREQ
- 5.71 MODPWMSHAPE
- 5.72 MODPWMSRC
- 5.73 MSTLOCK
- 5.74 MSTRELOCK
- 5.75 NOISADD
- 5.76 NOISLVL
- 5.77 OPC
- 5.78 OPCRet
- 5.79 OUTPUT
- 5.80 PER
- 5.81 PRE
- 5.82 PRERet
- 5.83 PULSDLY
- 5.84 PULSEDGE
- 5.85 PULSFALL
- 5.86 PULSFREQ
- 5.87 PULSPER
- 5.88 PULSRANGE
- 5.89 PULSRISE
- 5.90 PULSSYMM
- 5.91 PULSWID
- 5.92 QERRet
- 5.93 RCL
- 5.94 RMPSYMM
- 5.95 RST
- 5.96 SAV
- 5.97 SLVRST
- 5.98 SQRSYMM
- 5.99 SRE
- 5.100 SRERet
- 5.101 STBRet
- 5.102 SWP
- 5.103 SWPBEGFREQ
- 5.104 SWPCNTFREQ
- 5.105 SWPENDFREQ
- 5.106 SWPMKR
- 5.107 SWPMKRFREQ
- 5.108 SWPMODE
- 5.109 SWPSPNFREQ
- 5.110 SWPTIME
- 5.111 SWPTRGPER
- 5.112 SWPTRGPOL
- 5.113 SWPTRGSRC
- 5.114 SWPTYPE
- 5.115 SYNCOUT
- 5.116 SYNCTYPE
- 5.117 TRG
- 5.118 TSTRet
- 5.119 WAI
- 5.120 WAVE
- 5.121 WAVELVL
- 5.122 ZLOAD
- 6 Property reference
TTI TG5011 Signal Generator component
TTi TG5011 50 MHz Signal Generator
Component Source Code
Please click here to download the component source project: FC_Comp_Source_TTITG5011.fcsx
Please click here to view the component source code (Beta): FC_Comp_Source_TTITG5011.fcsx
Detailed description
No detailed description exists yet for this component
Examples
No additional examples
Macro reference
ADDRESSRet
ADDRESSRet | |
Returns the instruments address | |
- INT | Return |
AMPL
AMPLRNG
AMPLRNG | |
Sets the amplitude range to; 0 = AUTO, 1 = HOLD. | |
- BOOL | Range |
Sets the amplitude range (0 = AUTO, 1 = HOLD). | |
- VOID | Return |
AMPUNIT
AMPUNIT | |
Sets the amplitude units to; 0 = VPP, 1 = VRMS, 2 = DBM. | |
- BYTE | Units |
Sets the amplitude units (0 = VPP, 1 = VRMS, 2 = DBM). | |
- VOID | Return |
ARB1
ARB1 | |
Loads the binary-data to an existing arbitrary waveform memory location ARB1. | |
- UINT | Waveform |
16 Bit binary number for arbitrary waveform. | |
- VOID | Return |
ARB1DEFRet
ARB1DEFRet | |
Returns user specified waveform name, waveform pint interpolation state and waveform length of ARB1. | |
- STRING | Return |
ARB1Ret
ARB1Ret | |
Returns the binary-data from an existing abbitrary wavefrom memory location. | |
- UINT | Return |
ARB2
ARB2 | |
Loads the binary-data to an existing arbitrary waveform memory location ARB2. | |
- UINT | Waveform |
- VOID | Return |
ARB2DEFRet
ARB2DEFRet | |
Returns user specified waveform name, waveform pint interpolation state and waveform length of ARB2. | |
- STRING | Return |
ARB2Ret
ARB2Ret | |
Returns the binary-data from an existing abbitrary wavefrom memory location. | |
- UINT | Return |
ARB3
ARB3 | |
Loads the binary-data to an existing arbitrary waveform memory location ARB3. | |
- UINT | Waveform |
- VOID | Return |
ARB3DEFRet
ARB3DEFRet | |
Returns user specified waveform name, waveform pint interpolation state and waveform length of ARB3. | |
- STRING | Return |
ARB3Ret
ARB3Ret | |
Returns the binary-data from an existing abbitrary wavefrom memory location. | |
- UINT | Return |
ARB4
ARB4 | |
Loads the binary-data to an existing arbitrary waveform memory location ARB4. | |
- BYTE | Waveform |
- VOID | Return |
ARB4DEFRet
ARB4DEFRet | |
Returns user specified waveform name, waveform pint interpolation state and waveform length of ARB4. | |
- STRING | Return |
ARB4Ret
ARB4Ret | |
Returns the binary-data from an existing abbitrary wavefrom memory location. | |
- UINT | Return |
ARBDCOFFS
ARBDCOFFS | |
Sets the arbritary dc waveform offset to <nrf> volts. | |
- FLOAT | OffsetVoltage |
Set the offset voltage | |
- VOID | Return |
ARBDEF
ARBLOAD
ARBRESIZE
ARBRESIZE | |
Changes the size of arbritary waveform <cpd> to <nrf>. | |
- FLOAT | Size |
Size of waveform | |
- STRING | Waveform |
Arbritary Waveform | |
- VOID | Return |
BEEP
BEEP | |
Sound one beep. | |
- VOID | Return |
BEEPMODE
BEEPMODE | |
Set beep mode to; 0 = ON, 1 = OFF, 2 = WARN, 3 = ERROR. | |
- BYTE | Mode |
Sets the beep mode (0 = ON, 1 = OFF, 2 = WARN, 3 = ERROR). | |
- VOID | Return |
BST
BST | |
Sets the burst mode to; 0 = <OFF>, 1 = <NCYC>, 2= <GATED>, 3 = <INFINITE>. | |
- BYTE | MODE |
Sets the burst mode (0 = OFF, 1 = NCYC, 2 = GATED, 3 = INFINITE). | |
- VOID | Return |
BSTCOUNT
BSTCOUNT | |
Sets the burst count to <nrf> cycles, maximum 1048575 cycles. | |
- LONG | Count |
Sets the burst count in cycles (1 - 1048575). | |
- VOID | Return |
BSTPER
BSTPER | |
Sets the burst trigger period to <nrf> seconds. (Lower limit: 1us - Upper limit: 500s). | |
- FLOAT | Seconds |
Duration of the burst trigger period in seconds. | |
- VOID | Return |
BSTPHASE
BSTPHASE | |
Sets the burst phase to <nrf> degrees. (Lower limit: -360 - Upper limit: 360) | |
- FLOAT | Degrees |
Sets the burst phase in degrees (-360 - 360) | |
- VOID | Return |
BSTTRGPOL
BSTTRGPOL | |
Sets the burst trigger slope to; 0 = POS, 1 = NEG. | |
- BOOL | Slope |
Set the burst trigger slope (0 = POS, 1 = NEG). | |
- VOID | Return |
BSTTRGSRC
BSTTRGSRC | |
Sets the burst trigger source to; 0 = INT, 1 = EXT, 2 = MAN. | |
- BYTE | Source |
Set the burst trigger source (0 = INT, 1 = EXT, 2 = MAN). | |
- VOID | Return |
CALADJ
CALADJ | |
Adjust the selected calibration value by <nrf> (Lower limit: -100 - Upper limit: 100). | |
- FLOAT | Calibrate |
Adjust the selected calibration value (-100 - 100). | |
- VOID | Return |
CALIBRATION
CALSTEP
CALSTEP | |
Step to the next calibration point. | |
- VOID | Return |
CALVALRet
CALVALRet | |
Returns the value from level calibration steps. | |
- UINT | Return |
CLKSRC
CLKSRC | |
Sets the clock source to; 0 = INT, 1 = EXT. | |
- BOOL | Source |
Sets the clock source (0 = INT, 1 = EXT). | |
- VOID | Return |
CLKSRRet
CLKSRRet | |
Returns the clock source <INT> or <EXT>. | |
- BOOL | Return |
CLS
CLS | |
Clears status byte register of the interface. | |
- VOID | Return |
DCOFFS
DCOFFS | |
Sets the dc offset to <nrf> Volts. (Lower limit: -4.500 Vdc - Upper limit: 4.500 Vdc). | |
- FLOAT | DCOffset |
Sets the dc offset in Volts(Vdc) (4.500 Vdc - 4.500 Vdc). | |
- VOID | Return |
EERRet
EERRet | |
Query and clear execution error number register. | |
- STRING | Return |
ESE
ESE | |
Sets the Standard Event Status Enable Register to the value of <nrf>. | |
- BYTE | Value |
Value of register 0-255 | |
- VOID | Return |
ESERet
ESERet | |
Returns the value in the Standard Event Status Enable Register in <nr1> numeric format. The syntax of the response is <nr1><rmt>. | |
- BYTE | Return |
ESESet
ESESet | |
Sets the standard event status enable register to the value of <nrf>. (Lower limit: 0 - Upper limit: 255) | |
- BYTE | Value |
Enable the register to this value. (0 - 255) | |
- VOID | Return |
ESRRet
ESRRet | |
Returns the value in the standard event status register in <nr1> | |
- BYTE | Return |
FREQ
FREQ | |
Set the waveform frequency to <nrf> Hz. (Lower limit: 1uHz - Upper limit: 50MHz). | |
- FLOAT | Frequency |
Sets the waveform frequency in Hertz(Hz) (1uHz - 50MHz). | |
- VOID | Return |
HILVL
HILVL | |
Sets the amplitude-high-level to <nrf> Volts. (Lower limit: -0.490 V - Upper limit: 5.000 V). | |
- FLOAT | HighLevel |
Sets the amplitude-high-level in Volts(V) (-0.490 V - 5.000 V). | |
- VOID | Return |
IDNRet
ISTRet
ISTRet | |
Returns IST local message as defined by IEEE Std. 488.2. The syntax of the response is 0<rmt>, if the local message is false, or 1<rmt>, if the local message is true. | |
- BOOL | Return |
LOCAL
LOCAL | |
Returns the instrument to local opertion and unlocks the keyboard. | |
- VOID | Return |
LOCKMODE
LOCKMODE | |
Sets the synchronising mode to; 0 = MASTER, 1 = SLAVE, 2 = INDEP. | |
- BYTE | Mode |
Sets the synchronising mode (0 = MASTER, 1 = SLAVE, 2 = INDEP). | |
- VOID | Return |
LOLVL
LOLVL | |
Sets the amplitude-low-level to <nrf> Volts. (Lower limit: 5.000 V - Upper limit: -0.010 V). | |
- FLOAT | LowLevel |
Sets the amplitude-low-level in Volts(V) (-5.000 V - -0.010 V). | |
- VOID | Return |
LRN
LRN | |
Intall data from a previous *LRN? command. | |
- VOID | Return |
LRNRet
LRNRet | |
Returns the complete setup of the instrument as a binary data block | |
- INT | Return |
MOD
MOD | |
Sets modulation to; 0 = OFF, 1 = AM, 2 = FM, 3 = PM, 4 = FSK, 5 = PWM. | |
- BYTE | Modulation |
Sets modulation (0 = OFF, 1 = AM, 2 = FM, 3 = PM, 4 = FSK, 5 = PWM). | |
- VOID | Return |
MODAMDEPTH
MODAMDEPTH | |
Sets AM waveform depth to <nrf> %. (Lower limit: 0% - Upper limit: 120%). | |
- FLOAT | Frequency |
Sets AM waveform depth in percent (%) (0 - 120). | |
- VOID | Return |
MODAMFREQ
MODAMFREQ | |
Sets AM waveform frequency to <nrf> Hz. (Lower limit: 1uHz - Upper limit: 20kHz). | |
- FLOAT | Frequency |
Sets AM waveform frequency in Hertz(Hz) (1uHz - 20kHz). | |
- VOID | Return |
MODAMSHAPE
MODAMSRC
MODAMSRC | |
Sets AM waveform source to; 0 = INT, 1 = EXT. | |
- BOOL | Source |
Sets AM waveform source (0 = INT, 1 = EXT). | |
- VOID | Return |
MODFMDEV
MODFMDEV | |
Sets FM waveform deviation to <nrf> Hz. (Lower limit: 1uHz - Upper limit: 25MHz). | |
- FLOAT | Deviation |
Sets FM waveform deviation in Hertz(Hz) (1uHz - 25MHz). | |
- VOID | Return |
MODFMFREQ
MODFMFREQ | |
Sets FM waveform frequency to <nrf> Hz. (Lower limit: 1uHz - Upper limit: 20kHz). | |
- FLOAT | Frequency |
Sets FM waveform frequency in Hertz(Hz) (1uHz - 20kHz). | |
- VOID | Return |
MODFMSHAPE
MODFMSRC
MODFMSRC | |
Sets FM waveform source to; 0 INT, 1 = EXT. | |
- BOOL | Source |
Sets FM waveform source (0 = INT, 1 = EXT). | |
- VOID | Return |
MODFSKRATE
MODFSKRATE | |
Sets FSK rate to <nrf> Hz. (Lower limit: 2mHz - Upper limit: 100kHz). | |
- FLOAT | Rate |
Sets FSK rate in Hertz(Hz) (2mHz - 100kHz). | |
- VOID | Return |
MODFSKSRC
MODFSKSRC | |
Sets FSK waveform source to; 0 = INT, 1 = EXT. | |
- BOOL | Source |
Sets FSK waveform source (0 = INT, 1 = EXT). | |
- VOID | Return |
MODHOPFREQ
MODHOPFREQ | |
Sets HOP frequency to <nrf> Hz. (Lower limit: 1uHz - Upper limit: 50MHz). | |
- FLOAT | Frequency |
Sets HOP frequency in Hertz(Hz) (1uHz - 50MHz). | |
- VOID | Return |
MODPMDEV
MODPMDEV | |
Sets PM waveform deviation to <nrf> degrees. (Lower limit: -360° - Upper limit: 360°). | |
- FLOAT | Degrees |
Sets PM waveform deviation in degrees (-360 - 360). | |
- VOID | Return |
MODPMFREQ
MODPMFREQ | |
Sets PM waveform frequency to <nrf> Hz. (Lower limit: 1uHz - Upper limit: 20kHz). | |
- FLOAT | Frequency |
Sets FM waveform frequency in Hertz(Hz) (1uHz - 20kHz). | |
- VOID | Return |
MODPMSHAPE
MODPMSRC
MODPMSRC | |
Sets PM waveform source to; 0 INT, 1 = EXT. | |
- BOOL | Source |
Sets PM waveform source (0 = INT, 1 = EXT). | |
- VOID | Return |
MODPOLFSK
MODPOLFSK | |
Sets FSK trigger slope to; 0 = POS, 1 = NEG. | |
- BOOL | Slope |
Set FSK trigger slope (0 = POS, 1 = NEG). | |
- VOID | Return |
MODPWMDEVSYM
MODPWMDEVSYM | |
Sets PWM deviation to <nrf> %. ? | |
- BYTE | Deviation |
Sets PWM waveform deviation in percent. (?) | |
- VOID | Return |
MODPWMDEVWDT
MODPWMDEVWDT | |
Sets the PWM waveform deviation to <nrf> sec. | |
- FLOAT | Sec |
- VOID | Return |
MODPWMFREQ
MODPWMFREQ | |
Sets PWM waveform frequency to <nrf> Hz. (Lower limit: 1uHz - Upper limit: 20kHz). | |
- FLOAT | Frequency |
Sets PWM waveform frequency in Hertz(Hz) (1uHz - 20kHz). | |
- VOID | Return |
MODPWMSHAPE
MODPWMSRC
MODPWMSRC | |
Sets PWM waveform source to; 0 = INT, 1 = EXT. | |
- BOOL | Source |
Sets PWM waveform source (0 = INT, 1 = EXT). | |
- VOID | Return |
MSTLOCK
MSTLOCK | |
Sends signal to SLAVE generator to get synchronised | |
- VOID | Return |
MSTRELOCK
MSTRELOCK | |
Resynchronises the two generators in MASTER-SLAVE mode. | |
- VOID | Return |
NOISADD
NOISLVL
NOISLVL | |
Sets the output noise level to <nr1> %. (Lower limit: 0% - Upper limit: 50%) | |
- BYTE | Percent |
Sets the output noise level in percent. (0 - 50) | |
- VOID | Return |
OPC
OPCRet
OPCRet | |
Query Operation Complete status. The response is always 1<rmt> and will be available immediately the command is executed because all commands are sequential. | |
- BOOL | Return |
OUTPUT
OUTPUT | |
Sets the output to; 0 = ON, 1 = OFF, 2 = NORMAL, 3 = INVERT. | |
- BYTE | SetOutput |
Set the output. (0 = ON, 1 = OFF, 2 = NORMAL, 3 = INVERT). | |
- VOID | Return |
PER
PER | |
Sets the waveform period to <nrf> sec. (Lower limit: 20ns - Upper limit: 1Ms) | |
- FLOAT | Period |
Duration of the waveform period in seconds (20ns - 1Ms). | |
- VOID | Return |
PRE
PRE | |
Sets the Parallel Port Enable Register to the value <nrf>. | |
- BYTE | Status |
Set register value 0-255 | |
- VOID | Return |
PRERet
PRERet | |
Returns the value in the Parallel Poll Enable Register in <nr1> numeric format. The syntax of the response is <nr1><rmt>. | |
- BYTE | Return |
PULSDLY
PULSDLY | |
Sets the waveform delay to <nrf> sec | |
- FLOAT | Sec |
- VOID | Return |
PULSEDGE
PULSFALL
PULSFREQ
PULSFREQ | |
Sets the pulse waveform frequency to <nrf> Hz (Lower limit: 1uHz - Upper limit: 50MHz). | |
- FLOAT | Frequency |
Sets the pulse waveform frequency in Hertz(Hz) (1uHz - 50MHz). | |
- VOID | Return |
PULSPER
PULSPER | |
Sets the pulse waveform period to <nrf> sec. (Lower limit: 20ns - Upper limit: 1Ms). | |
- FLOAT | Period |
Duration of the pulse waveform period (20ns - 1Ms). | |
- VOID | Return |
PULSRANGE
PULSRANGE | |
Sets PWM waveform source to <1>, <2> or <3>; 1 = 1, 2 = 2, 3 = 3. | |
- BYTE | Range |
Sets the pulse rise and fall range. (1, 2 or 3) | |
- VOID | Return |
PULSRISE
PULSSYMM
PULSSYMM | |
Sets the pulse waveform symmetry to <nrf> %. (Lower limit: 0 - Upper limit: 100) | |
- FLOAT | Symmetry |
Sets the pulse waveform symmetry in percent. (0 - 100) | |
- VOID | Return |
PULSWID
PULSWID | |
Sets the pulse waveform width to <nrf> sec. (Lower limit: 20ns - Upper limit: 1Ms). | |
- FLOAT | Seconds |
Sets the pulse waveform width in seconds (20ns - 1Ms). | |
- VOID | Return |
QERRet
QERRet | |
Query and clear error register | |
- BYTE | Return |
RCL
RCL | |
Recalls the instrument setup contained in store <nrf>. | |
- BYTE | StoreLocation |
Memory location (0-9) | |
- VOID | Return |
RMPSYMM
RMPSYMM | |
Sets the ramp waveform symmetry to <nrf> %. (Lower limit: 0 - Upper limit: 100) | |
- FLOAT | Symmetry |
Sets the ramp waveform symmetry in percent (0 - 100). | |
- VOID | Return |
RST
RST | |
Resets the instrument parameters to their default values. | |
- VOID | Return |
SAV
SAV | |
Saves the complete instrument setup to the setup-file named <nrf> | |
- BYTE | StoreLocation |
Memory location of register (0-9) | |
- VOID | Return |
SLVRST
SLVRST | |
Sets the SLAVE generator ready to be synchronised | |
- VOID | Return |
SQRSYMM
SQRSYMM | |
Sets the square waveform symmetry to <nrf> %. (Lower limit: 20 - Upper limit: 80) | |
- FLOAT | Symmetry |
Sets the square waveform symmetry in percent (20 - 80). | |
- VOID | Return |
SRE
SRE | |
Set the Service Request Enable Register to <nrf>. | |
- BYTE | Status |
- VOID | Return |
SRERet
SRERet | |
Returns the value of the Service Request Enable Register in <nr1> numeric format. | |
- BYTE | Return |
STBRet
STBRet | |
Returns the value of the Status Byte Register in <nr1> numeric format. | |
- BYTE | Return |
SWP
SWP | |
Sets the sweep to <ON> or <OFF>. 0 = ON, 1 = OFF. | |
- BOOL | Sweep |
Enable or disable the sweep (0 = ON, 1 = OFF). | |
- VOID | Return |
SWPBEGFREQ
SWPBEGFREQ | |
Sets the sweep start frequency to <nrf> Hz (Lower limit: 1uHz - Upper limit: 100kHz) | |
- FLOAT | Frequency |
Sets the sweep start frequency in Hertz(Hz) (1uHz - 100kHz). | |
- VOID | Return |
SWPCNTFREQ
SWPCNTFREQ | |
Sets the sweep centre frequency to <nrf> Hz. (Lower limit: 1uHz - Upper limit: 50MHz). | |
- FLOAT | Frequency |
Sets the sweep centre frequency in Hertz(Hz) (1uHz - 50MHz). | |
- VOID | Return |
SWPENDFREQ
SWPENDFREQ | |
Sets the sweep centre frequency to <nrf> Hz. (Lower limit: 1uHz - Upper limit: 50MHz.) | |
- FLOAT | Frequency |
Set the sweep end frequency in Hertz(Hz) (1uHz - 50MHz). | |
- VOID | Return |
SWPMKR
SWPMKR | |
Sets the sweep marker to <ON> or <OFF>. 0 = ON, 1 = OFF. | |
- BOOL | Marker |
Enable or disable the sweep marker (0 = ON, 1 = OFF). | |
- VOID | Return |
SWPMKRFREQ
SWPMKRFREQ | |
Sets the sweep marker to <nrf> Hz. (Lower limit: 10kHz - Upper limit: 100kHz). | |
- FLOAT | Frequency |
Set the sweep marker in Hertz(Hz) (10kHz - 100kHz). | |
- VOID | Return |
SWPMODE
SWPMODE | |
Sets the sweep mode to <CONT> or <TRIG>. 0 = CONT, 1 = TRIG. | |
- BOOL | Mode |
Set the sweep mode (0 = CONT, 1 = TRIG). | |
- VOID | Return |
SWPSPNFREQ
SWPSPNFREQ | |
Sets the sweep frequency span to <nrf> Hz. (Lower limit: 1uHz - Upper limit: 50.25kHz). | |
- FLOAT | Frequency |
Set the sweep frequency span in Hertz(Hz) (1uHz - 50.25kHz). | |
- VOID | Return |
SWPTIME
SWPTIME | |
Sets the sweep time to <nrf> seconds | |
- FLOAT | Seconds |
Set the sweep time in seconds. | |
- VOID | Return |
SWPTRGPER
SWPTRGPER | |
Sets the sweep trigger period to <nrf> seconds | |
- FLOAT | Seconds |
Set the sweep trigger period in seconds. | |
- VOID | Return |
SWPTRGPOL
SWPTRGPOL | |
Sets the sweep trigger slope to; 0 = POS, 1 = NEG. | |
- BOOL | Slope |
Set the sweep trigger slope (0 = POS, 1 = NEG). | |
- VOID | Return |
SWPTRGSRC
SWPTRGSRC | |
Sets the sweep trigger source to; 0 = INT, 1 = EXT, 2 = MAN. | |
- BYTE | Source |
Set the sweep trigger source (0 = INT, 1 = EXT, 2 = MAN). | |
- VOID | Return |
SWPTYPE
SYNCOUT
SYNCOUT | |
Sets the sync output to; 0 = ON, 1 = OFF. | |
- BOOL | Sync |
Enable/disable sync output (0 = ON, 1 = OFF). | |
- VOID | Return |
SYNCTYPE
TRG
TRG | |
This command is the same as pressing the TRIGGER key. | |
- VOID | Return |
TSTRet
TSTRet | |
The generator has no self test capability and the response is always 0 <rmt>. | |
- BOOL | Return |
WAI
WAI | |
Wait for Operation Complete true. As all commands are fully executed before the next is started this command takes no additional action. | |
- VOID | Return |
WAVE
WAVELVL
WAVELVL | |
Sets the output waveform level to <nr1> %. (Lower limit: 50 - Upper limit: 100) | |
- FLOAT | Percent |
Sets the output waveform level in percent (50 - 100). | |
- VOID | Return |
ZLOAD