Hi,
same procedure...baud is 9600.. I checked with Advanced...but why in test chart I have data normally?
what version of excel do you have? I have MS Office Pro Plus 2016 and DS is add in to Excel...
regards

Hi,
no data when connect to excel..RXD red led on serial/usb flashes when it connect to terminal...when disconnect from terminal and connect to excel that led stop to flash...maybe we must check charts in sending section?
regards

HI, with Terminal, I get diagnostics when I start RX (serialusb1)...DATA when start TX (serialusb2)...everything is ok. in DataStreamer with same procedure as above I have no data (datastreamer1)... I use many times DS with sending data in CSV format,and I get data normally, so I can't find an error...

Hi,
never mind about test, I'll do it myself...thanks anyway...
with last charts I get no data neither at terminal , nor at Excel...
regards

HI, I get no data with set PIC18F46K22/ PIC18F25K22 , with WDT disable...when WDT enable, I get data in terminal with delay ,but not in Excel...I don't know if this is about config...with PIC16F1939 in sender , I must change hardware , If I can find that PIC in similar case (QFP)...also PIC16F1939 d...

Hi, so far after some tests with final charts... with WDT disabled, no data either in terminal program or Excel. with WDT enabled At terminal program ,after 2 min from reboot I get "TEST OK" ...after 1 min data 12.34,56.78 for 1 min...then stop data for 1 min , then the same from TEST OK... At Excel...

Hi, first test with (ESP_ESP_AP_Rx_UART_Out)...with sender connected (ESP-ESP_AP_Tx), I get the following Start fail UART Test OK Initialise ESP ESP OK Create AP AP Created Get ESP Server IP IP=192.168.4.1 Start Server Start OK Waiting for Data.. it seems that sender don't send data...wrong IP in se...

Hi,
some corrections in sender hardware and continue tomorrow...many thanks .
regards

Hi,
no display connected...I'll try to connect a general 4X20 that I have...but can it works with V+ 3,3V ?..
if connects , how can use that for test?
regards

Hi,
I was checked connections...are ok..with set watchdog timer enabled , after boot/reboot I have test OK after 2min and every 2min...with set watchdog timer disabled, I have no test OK...
regards