Search found 11 matches
- Sat Mar 30, 2024 8:28 am
- Forum: Bug Reports
- Topic: HC05 Bluetooth: send command and set pair key macro problem!!!
- Replies: 2
- Views: 307
Re: HC05 Bluetooth: send command and set pair key macro problem!!!
command to change name works!! so, the communication between micro controller an Bluetooth module its OK!!
- Sat Mar 30, 2024 8:21 am
- Forum: Bug Reports
- Topic: HC05 Bluetooth: send command and set pair key macro problem!!!
- Replies: 2
- Views: 307
HC05 Bluetooth: send command and set pair key macro problem!!!
*send command macro
and
*set pair key macro
don't works.
here you have an example of at command structure to verify the correct syntax:
correct syntax is not possible to add.
and
*set pair key macro
don't works.
here you have an example of at command structure to verify the correct syntax:
correct syntax is not possible to add.
- Sat Mar 30, 2024 7:00 am
- Forum: Bug Reports
- Topic: Macro file sd/sdhc bug
- Replies: 8
- Views: 685
Re: Macro file sd/sdhc bug
---> The CS pin of the SD component to pin D10 / PORTB.2 DONĀ“T FIX THE PROBLEM
--> DEFAULT CLK PIN SETTINGS (CHANNEL 1) PORTB.5 DONT WORKS
THE PROBLEM WAS SOLVED IF:
CHANGE CLK PIN PORTB.5 ----> PORTB.0
--> DEFAULT CLK PIN SETTINGS (CHANNEL 1) PORTB.5 DONT WORKS
THE PROBLEM WAS SOLVED IF:
CHANGE CLK PIN PORTB.5 ----> PORTB.0
- Mon Mar 18, 2024 8:58 am
- Forum: Bug Reports
- Topic: Macro file sd/sdhc bug
- Replies: 8
- Views: 685
Re: Macro file sd/sdhc bug
If disable sd initialise macro
Led turns on so looks like sd macro initialise can't step out to work with sd module- Mon Mar 18, 2024 8:54 am
- Forum: Bug Reports
- Topic: Macro file sd/sdhc bug
- Replies: 8
- Views: 685
Re: Macro file sd/sdhc bug
Initialise sd macro can't step out to continue the flow. In the example: 1.- an output begins with 0 2.-then the component macro "sd initialise" 3.-and at the end output change to 1 to turn on a led IMG_20240318_022022.jpg The led don't turn on, the initialise sd macro can't step out. IMG_20240318_0...
- Mon Mar 18, 2024 8:37 am
- Forum: Bug Reports
- Topic: Macro file sd/sdhc bug
- Replies: 8
- Views: 685
Re: Macro file sd/sdhc bug
Spi cs/ss is working well and correctly conected
- Tue Mar 05, 2024 6:35 am
- Forum: Bug Reports
- Topic: Macro file sd/sdhc bug
- Replies: 8
- Views: 685
Macro file sd/sdhc bug
Component macro
filesd::initialise()
Don't step out on real hardware running.
Work flow
1.-Initialise screen
2 - initialise sd module
3- print: finish line code
Please check the complete hardware demo upload video:
https://youtu.be/gAGuB8S4pEk?si=rwANGc9KHbJED69H
filesd::initialise()
Don't step out on real hardware running.
Work flow
1.-Initialise screen
2 - initialise sd module
3- print: finish line code
Please check the complete hardware demo upload video:
https://youtu.be/gAGuB8S4pEk?si=rwANGc9KHbJED69H
- Sun Feb 18, 2024 11:39 pm
- Forum: Bug Reports
- Topic: RTC component macro set for 12 hours does not work correctly
- Replies: 2
- Views: 193
Re: RTC component macro set for 12 hours does not work correctly
Hello Martin. I know there are discussions on the Internet about this topic. As an electronics designer, when I have a question about a format or even general design questions, I find it helpful to look for standardized references. In the case of the 12-hour format, a useful reference is the success...
- Sun Feb 18, 2024 6:07 am
- Forum: Bug Reports
- Topic: RTC component macro set for 12 hours does not work correctly
- Replies: 2
- Views: 193
RTC component macro set for 12 hours does not work correctly
when I try to set the 24 hour value (rtc module default format) to 12 hour format. specifically to change from 0:00 format to (12 hour format), which should be (12:00am), as shown below. 00:00 (24 hours format) = 12:00 am (12 hours format) problema rtc.jpg Using the following logic schematic loaded ...
- Sat Sep 23, 2023 3:07 pm
- Forum: Bug Reports
- Topic: problems with component: csv Read/write --> ReadAsNumber
- Replies: 3
- Views: 3748
Re: problems with component: csv Read/write --> ReadAsNumber
main csvr ead/write.fcfx file
2 diferent csv files to test
dont forget to change files folder root directory
ready to download and run
thanks.
2 diferent csv files to test
dont forget to change files folder root directory
ready to download and run
thanks.