Unfortunately this is not the problem.
Quartz frequency is 8Mhz /2=4 x 20 =80MHz 'clock for PIC / Prim Osz.
Quartz frequency is 8Mhz /2=4 x 24 =96MHz / 2 =48MHz for USB / Prim Osz

mfg
SpeedPic32

The compilation runs without errors The simulation is also running when I have transferred the hexcode the program hangs in the initialisation. When I deactivate the initialisation the PIC enters the blinking loop. Windos always indicates that the USB device is unknown urgently need help mfg SpeedPi...

Found the error.
It is in the memory path

I have a small programme. an led flashes every second.
now I want to add a serial interface, for example. then this message appears.

greetings SpeedPic32

Hello together My idea is the following Everyone makes one or more files available to everyone with only a second loop, so that a collection of templates is created, which are published in the wiki, for example. Then you don't have to experiment with how a chip how a chip has to be set up so that it...

Hello together

Can you convert these displays into FC ?

have a look here.
https://4dsystems.com.au/products/gen4-esp32-28/

Greetings SpeedPic32

Hi,

We shall be grateful if you can add support for PIC18F27Q84 microcontroller SpeedPic32

The selection must be made twice at the moment. Steve has recognized this correctly. This is of course unpleasant and should be fixed. But what is not possible at all is that TX and RX have the same legs. that is not possible at all. I also know that this is not done, but it is offered, which in tur...

The selection must be made twice at the moment. Steve has recognized this correctly. This is of course unpleasant and should be fixed. But what is not possible at all is that TX and RX have the same legs. that is not possible at all. I also know that this is not done, but it is offered, which in tur...

Hi, that works. I do not have the option of selecting B14 for RX and B15 for TX, for example, but B14 is displayed for TX. G9, B2, B6, B14, F3, D0, D1, D5 are displayed in both selection windows When I switch to channel 4, all TX pins are correctly present. B6, B0, B7, B8, B15, D9, D4, E3. With kind...