Hi Ben Perfect! it's working nice! The data is from the Accelerometer und Gyro is now ok, and the program can now dedect, if one or both sensor are connected and save one or both sensor data in a CSV File. I will still try to read and write the registers but that will take a little more time. I have...

Hi Ben

That's good news. I'll test it right away

but there is a small mistake
I have made the update but then there is a fail when compiling, if I undo the update I can compile again without errors.

I use the latest version FC10 here my program:

Hi Martin Filters I do not use filters with Flowcode. However, it would be easy and convenient to install such filters. This is not a simple sensor. There are two sensors in one housing. 3D accelerometer, 3D gyroscope, is one and the3D magnetometer is the another one. However, the sensor itself has ...

Hi Ben Thank you very much. The Atom S3 template is working nice. the display also works, but I have to set all the pin.maybe you can make a template with a display Display only in software mode on my computer is compiling. a new component is SerialPort.fcpx but no info what it is. and the display m...

Hi to All

There is a problem with the timer/counter using with ESP32.
In the simulation its working fine but in the hardware not. it's shows 0.000 (real time is working nice)
program:

Hi Martin

Thank you for testing my program.
I will try with another IDF version.

Special is, that wlan and realtime clock works with the ESP32 S3.

Hi to All

It's a small program, just one macro, to test WIFI, but it's not compiling to hex

Hi Ben

This is a great advantage for my recorder.

It's working nice, Flowcode, File_ESP32_SDMode1 and longfile name.
Even if I don't know what heap or stack means. Both settings work fine

Hi Ben Creating a file automatically with Flowcode is easy. Generating a file name is also easy. But with 8.3 digits no date and time can be used as filename. Would it be possible in the future to work with long filenames with the Flowcode component? I have found a setting in the ESP32 S3 setup. som...

Hi Ben For the Atom S3 the component gLCD_ST7789V1 is working to display text. The Atom matrix has a 5x5 LED Matrix and it's working with FC WS2812C For the M5 Dial knob I think an additional component for GC9A01A Display driver is necessary. The display is also used by other manufacturers A very go...