Hi Steve So reinstalled v10 and loaded the simple panel test and the 2D panel shows all components and the image correctly. so went to global settings to refine the GUI and setup my scheme and ticked the disable the 3D system panel. Its this that causes the 2d panel to be blank when re loading the p...

Hi Simple test project attached and the before and after grab shots. Created a simple tic test project on the 2D panel with creation-image as background locked aspect and position. Component IntOscHelper1 and 2D generic LCD dropped into and arranged on the 2D panel. 3D system panel disabled in globa...

Hi, Can you advise what you would use the 2D panel for. I have used it to create a flat v5 style fixed basic not resizable project. added a 2D component say LCD generic. Then saved the project and closed. then opened the same project again and all the items that was added to the 2D panel are missing...

Hi Ben,
Can you take a look at the one wire component and coms to find out why port C.7 fails to return the temperature,
The hardware works with 1 wire code from flowcode v5 on C.7 port and not working with v10

Thanks Darryn

Hi Ben, Specifically C.7 is the problem with v10, hardware always works with perfect results with v5 flowcode. C.7 tested with probes and working as digital and v. Any combination and ordering of the v10 code will always have the C.7 port not converting, Can you check the defines for the PIC18F66K22...

Thanks Ben, That worked for the two probes connected so continued with three and also working just fine. All three stable and converting to temperature on the LCD But the 4 x probes test has an issue with the port pin C.7 and no temperature showing on the hardware test. The port C.7 is working with ...

Hi Have swapped the one wire component and then the DS18B20 initialisation order but the second instance of the DS18B20v2 showing 85 in hardware. If I remove 1 set so only single DS18B20 on the port C.0 or A.1 both work individually. Another observation the new 2d panel does not show the link betwee...

Hi, Please can you help with the connecting x 2 DS18B20 to separate ports pins, Only one is working and showing the tempeature value in hardware and the other is static at 85 I have tested both with separate V10 code on the port A.0 and C.0 and both probes work fine in hardware. Not sure if the prob...