Hello.
It looks like there is an issue with the EEPROM initial values set within EEPROM ppropeties.
Can you try deleting them and if they are required, try using the EEPROM write component macros.
Search found 1357 matches
- Sat May 25, 2024 2:57 pm
- Forum: Bug Reports
- Topic: error de compilacion con 16F1688 y licencia Standar
- Replies: 3
- Views: 17
- Fri May 24, 2024 3:14 pm
- Forum: General
- Topic: Visualizar consola
- Replies: 2
- Views: 31
Re: Visualizar consola
Hola.
Sólo para agregar a la respuesta de Ben.
Necesitará tener una licencia profesional para ver los datos de la consola, incluida la EEPROM.
Hello.
Just to add to Bens reply
You will need to have a professional licence to view the console data including EEPROM
Sólo para agregar a la respuesta de Ben.
Necesitará tener una licencia profesional para ver los datos de la consola, incluida la EEPROM.
Hello.
Just to add to Bens reply
You will need to have a professional licence to view the console data including EEPROM
- Wed May 22, 2024 8:21 am
- Forum: Bug Reports
- Topic: Compilation error when using MFRC522 component with ESP32.[SOLVED]
- Replies: 2
- Views: 62
Re: Compilation error when using MFRC522 component with ESP32.
Hello Sasi Many thanks for the bug spot. ESP32 is being over fussy. I have fixed the issue. To try the component. Browse to this location using file explorer , it's hidden by default so just paste the link into your address bar. C:\ProgramData\MatrixTSL\FlowcodeV10\Components Place the attached comp...
- Mon May 20, 2024 3:15 pm
- Forum: Bug Reports
- Topic: arduino INTERRUPTS - IOC PORTD... do not select..
- Replies: 6
- Views: 934
Re: arduino INTERRUPTS - IOC PORTD... do not select..
Hi Lambra I have just testing IOC on the Arduino Uno & there is nothing to fix! Port IOC works for ports B,C and D. Okay so I do NOT ...get the BLUE flag or the RED flag to set..!! I consider this to be a bug.... which I bave tracked back to the days of V5 flowcode.. No, not a bug since with AVR it ...
- Mon May 20, 2024 12:23 pm
- Forum: Bug Reports
- Topic: SR04 Ultrasonic Sensor
- Replies: 13
- Views: 907
Re: SR04 Ultrasonic Sensor
Hi Iain I have just looked into this, and its not a bug but a setting in which I gave incorrect advice. What I have done is exposed the timer rollover time which is in seconds The furthest distance that can be measured is 310 cm = 18ms. Therefore, the value exposed can't be below the maximum ms time...
- Mon May 20, 2024 8:06 am
- Forum: General
- Topic: PIC12F509 Compile Error
- Replies: 8
- Views: 125
Re: PIC12F509 Compile Error
Hi Alan
I would not recommend using 12F509 as the memory is too low to do anything with.
The error is just stating the target device has run out of memory.
For example, if you change the target device to 12F1840, not only will it run a lot faster, but there will also be much more memory available.
I would not recommend using 12F509 as the memory is too low to do anything with.
The error is just stating the target device has run out of memory.
For example, if you change the target device to 12F1840, not only will it run a lot faster, but there will also be much more memory available.
- Fri May 17, 2024 3:40 pm
- Forum: General
- Topic: Matrix Keypad Issues Disturbance
- Replies: 4
- Views: 850
Re: Matrix Keypad Issues Disturbance
Hello.
If you look at Generic Keypad on the Wiki, it shows you how to wire up the keypad.
If you look at Generic Keypad on the Wiki, it shows you how to wire up the keypad.
- Fri May 17, 2024 11:14 am
- Forum: General
- Topic: New MCP690X Thermocouple Component.
- Replies: 39
- Views: 13714
Re: New MCP690X Thermocouple Component.
Thanks Stefan.
I have tried with CH1 on the Wroom-32 and with the same pins as you and it's working for me.
I have tried with CH1 on the Wroom-32 and with the same pins as you and it's working for me.
- Fri May 17, 2024 10:21 am
- Forum: General
- Topic: New MCP690X Thermocouple Component.
- Replies: 39
- Views: 13714
Re: New MCP690X Thermocouple Component.
Hi Stefan.
I have just tested my MCP9600 on CH1 on Wroom-32 and is working as expected.
What pins are you using for data and clock?
I have just tested my MCP9600 on CH1 on Wroom-32 and is working as expected.
What pins are you using for data and clock?
- Fri May 17, 2024 7:21 am
- Forum: Projects - Embedded
- Topic: Secondary oscillator on a PIC16F18425
- Replies: 4
- Views: 760
Re: Secondary oscillator on a PIC16F18425
There must be a bug in the settings somewhere. Its like there are not enough options in the dropdown to set to SOSC and HFINOSC 32MHz No, only set it for HFINOSC 32MHz. Config settings OSC.png SOSC is only set within timer 0 Make sure the clock is running at the desired speed e.g 32MHz, by running ...