Hi Jorgen The PWM component needs to have a PWM Timer selected and has a period overflow of 255 for 8-bit devices and 65535 for 16-bit devices which also needs to be set according to your device. I see your slider has a range of 0-4095 so you could perhaps use the Map component to scale to 0-255 for...

Hi

What "nano" are you trying to use?

Regards

Hi

Glad to hear you have it working and happy to have been of help.

Have a good holiday.

- - -
Me alegra saber que lo tienes funcionando y feliz de haber sido de ayuda.

Ten unas buenas vacaciones.

Regards

Hi Just going through your chart now. In your Master it appears that in your settings you have the Watchdog Timer enabled.This will force your chip to keep resetting when the period expires unless you check the Auto-Clear Watchdog too. The WDT is a handy feature if needed and a pain if forgotten :) ...

Hi Cuando el máster le envié 34, pregunta por el estado del teclado, y se lo debe de enviar al máster. When the master sent him 34, he asks about the status of the keyboard, and he must send it to the master. If I understand correctly I think you will have problems. For the slave to return a value t...

Hi I need to look at your charts to make sure I understanding things. I'll do that later. From what I read it seems you send a "command" to your slave and it should respond with the value of it's pressed key. When is the slave key pressed? Is it pressed and the value stored for retrieval later, or a...

Hi Can you connect the GPS module directly to a PC and capture the dump the module sends out. That will really help to identify the issue. With anything to do with UART a USB-TTL gadget such as below is your best friend. https://www.amazon.co.uk/CP2102-Serial-Converter-Module-Dupont/dp/B07XRF152K/re...

Hi I might have one somewhere to try. If I find it I'll see what I get but I think it was a cheap module so ended up in a drawer as it was not very good. Meanwhile, do you have a USB-TTL serial converter? If so, you could connect the Rx terminal of the converter to the UART Rx pin, open up a Termina...

Hi What I have noticed is that every time I close the program and open it, for example the next day, the pin configuration assigned to the keyboard is lost in FC. When you open the FC program again, the row and column pins are reset to the default values ​​in FC. Similar issues to this have been fou...

Hi

All components are now free, you just need to purchase chip packs for those not included as "free", and any required license if not for hobby use. Have you downloaded all toolchains and set their location in Global Properties?

Regards