Thanks Jorgen and Martin work with timer1, 1:1, 1:1 with 16 bit timer; The reading is a little unstable, but it sends a reading very close to the real one. I think it is for INT readings 0-65535 and the sensor has a reading of 20-290 that exceeds the 8 bit timer 0-255. I had thought the setting was ...

Hi Jorgen, I will do tests and keep you informed.

Enrique
Thanks

config

Hello Jorge,

I made the selection of the component, but it keeps sending 0 zero.

Enrique

the rest of the photographs

Hello Martin, I sent the readings with a file from the sensor that you designed in flowcode 5 with its reading and physical measurement and included the measurement with the flowcode 10 component on display and physically as well as the configuration. I use the PIC16F1847 or the PIC16F819, I send th...

Hi Martin; Yes, in fact it is working with a program that you made in Flowcode 5, but the process is simpler in flowcode 10; use the same PCBs in the process you designed in V5 if it works; Even a few months ago you fixed that component in V10, it only multiplied the reading by 1.65 and the distance...

I can connecting echo B6 and trigger B7, timmer0 1:1 1:1 work ? or B0 and B1

I tested it using a PIC16f819 and PIC16f1847 and it not worked
( Use Timer interrupt to yes and set the timer for timer 0 and pre and post scaler both at 1:1 )

I tested it using a PIC16f887 and it worked