Hello!
Using PIC24EP128MC202. Placing I2C component shows 2 channels for I2C. Component "GroveBarometer BMP280" shows only channel1?
I need the second channel while channel1 is occupied. Is this a bug?
Regards
Jorg

Hello!
Thanks for the advice.
But why do you not write the sensor name in the component list?


Regards
Jorg

Hello!
I want to make a project with the sensor BMP280.
Under sensors I found only "Barometer BME280" and in the program directory in components was "Grove_Barometer_Sensor_BMP280".
What is here correct?

Is the BME usable for BMP?


Regards
Jorg

Hello!
I want to make a project with the sensor BMP280.
Under sensors I found only "Barometer BME280" and in the program directory in components was "Grove_Barometer_Sensor_BMP280".
What is here correct?

Is the BME usable for BMP?


Regards
Jorg

Hi Ben,
you`re right, now it`s running without errors and quicker.
A good description to that point in the help document would be good.

Great done from you!

Now other users have although the possibility for one size higher resolution oled-display
with graphic in 128x128 pixels.

Regards
Jorg

Hi Ben, I was out of the office some days, but now I tested the downloaded component. All was working now. You are the greatest! The idea with refresh is although working. It`s a good idea! Another great jump forward is the possibility to choose fonts for text. This is now readable for older users a...

Hello! Here are the results from testing: Rectangle (boundary=white inside=black) transparent=0 solid=0 --> OK Rectangle (boundary=white inside=white) transparent=1 solid=0 --> OK Rectangle (boundary=white inside=white) transparent=0 solid=1 --> OK Line --> OK Print string --> OK Fonts --> OK Clear ...

Hello! I did it and now port b is complete toggling. Idea for this long way to find a solution: > creation of a wikipedia for hints like this case < There anybody can write or choose a cpu or component, where solutions for problems are writing down. Where although little drawings, how to connect som...

Hello! I tried several chips with the same result. Measuring with an oscilloscope: Pin 15 = toggling Pin 16 = toggling Pin 17 = GND ??? Pin 18 = +2V ??? Pin 19 = GND Pin 20 = +2V (vcap) Pin 21 = GND ??? Pin 22 = GND ??? Pin 23-26 = toggling Pin 27 = GND Pin 28 = +3,25V Is it a help, while pin 18 hav...

Hello, I tried your idea with the c-box. Result is the same like before. Pin 17,18,21 and 22 are not toggling. All other pins are working. Switch off the comparator modul gives no success. Setting ANSELB to 0 is although not successfully. Any idea? This would solve in the end, that the oled modul wi...