Hi

Whilst I know of LEDs not reinitialising when simulation has been stopped and restarted, I've not came across it not responding to being told to switch off at the start.

Perhaps to narrow it down could you set the pins off (e.g. set output of B1 = 0 or such like)?

Regards

Hi This is a link to one of my posts, using an esp8266 to update TS. As mentioned in the post, not a finished chart or anything, just showing "steps" required for me to connect and publish, which may help. Regards PS I've been assisting in a water level project too, one version with ultrasonics, the...

Hi I've used ThingSpeak extensively in the past but I haven't tried the IOT_Made_Easy (or not) component. I usually post data just using the api key but have used the mqtt component too. I've posted plenty on it and like a lot of such things used value pairs for the data. I'll try the IOT component ...

Hi Did a couple of tests today. Set up FC pretty much as the example file using a PIC18877 with trivial modifications to suit. Set up a little test rig to measure distance from sensor to target. Rig holds the sensor at 90' to target, vertically, with very impressive results for such a module and my ...

Hi

The "old" forum is a great source of knowledge going back to stoneage times

Regards

Hi Generally speaking, yes, you can. If you do a search in the forum you will find pleanty of info such as this https://www.matrixtsl.com/mmforums/viewtopic.php?p=106397#p106397 You might also want to include a truly random variable such as a temperature reading or an ADC on a floating pin to help m...

Hi I had a project to monitor tanks (water, not Challenger) and the remote tanks communicated to a "base station" via LoRa. The base station located in the house would then communicate via WiFi / Internet to PushingBox which would subsequently send out Push/email alerts etc. However if the WiFi/Inte...

Hi

This seems to work for me.

If I step through I can follow the path doing as it should and if I then switch off my laptop WiFi it reacts accordingly.
Regards

Hi

When simulating you should be good. Have you set the properties in Network Component correctly?

Regards

Hi Ouch... remembering that far back :) I was going to update to have a Web Developer "app" access the database but realised I'd need to refresh my memory a lot..... So, from memory that still works:- When simulating using the Network Comms and and ESP WLAN components I have never got "autodetect" t...