"I tried to make the simulation as realistic as possible.
E.g. if not added Sample or Initialise, then the simulation should fail to work." It work.
Perfect Martin Thank´s
Create library for the AHT10 sensor
-
- Posts: 615
- http://meble-kuchenne.info.pl
- Joined: Thu Dec 03, 2020 8:25 pm
- Location: Denmark
- Has thanked: 507 times
- Been thanked: 132 times
-
- Posts: 8
- Joined: Mon Oct 30, 2023 1:17 pm
- Has thanked: 2 times
- Been thanked: 3 times
Re: Create library for the AHT10 sensor
The Flowcode team really did a great job. I'm really looking forward to testing the new sensor. I hope one day I can make good contributions to the community too.
-
- Posts: 8
- Joined: Mon Oct 30, 2023 1:17 pm
- Has thanked: 2 times
- Been thanked: 3 times
Re: Create library for the AHT10 sensor
I am unable to compile the code for any of the AHT10 functions. The library is updated, but it is not possible to compile.
- Attachments
-
- Erro_AHT10.jpg (71.5 KiB) Viewed 2332 times
-
- Matrix Staff
- Posts: 1451
- Joined: Wed Dec 02, 2020 11:07 pm
- Has thanked: 512 times
- Been thanked: 472 times
Re: Create library for the AHT10 sensor
Hi.
Many thanks for reporting the issue.
I believe I have resolved the issue.
If you would like to try the component before the update is pushed.
Browse to this location using file explorer, it's hidden by default so just paste the link into your address bar.
Replace the existing file with the attached file.
If Flowcode is already open, then you will need to reload your project for the new components to work
If you run any component updates, then the components you added will be overwritten.
Many thanks for reporting the issue.
I believe I have resolved the issue.
If you would like to try the component before the update is pushed.
Browse to this location using file explorer, it's hidden by default so just paste the link into your address bar.
Code: Select all
C:\ProgramData\MatrixTSL\FlowcodeV10\Components
If Flowcode is already open, then you will need to reload your project for the new components to work
If you run any component updates, then the components you added will be overwritten.
- Attachments
-
- Humidity_AHT10.fcpx
- (4.78 KiB) Downloaded 28 times
Martin
-
- Posts: 615
- Joined: Thu Dec 03, 2020 8:25 pm
- Location: Denmark
- Has thanked: 507 times
- Been thanked: 132 times
Re: Create library for the AHT10 sensor
Hi again!
Just perform a test, for me the AHT10 work perfekt as well in simulation and real world, Martin push your latest version out in the update.
I will make some compare with other similar device later.
Thank´s.
Br Jorgen
Just perform a test, for me the AHT10 work perfekt as well in simulation and real world, Martin push your latest version out in the update.
I will make some compare with other similar device later.
Thank´s.
Br Jorgen
- Attachments
-
- Aht10.fcfx
- (16.23 KiB) Downloaded 31 times
-
- Posts: 8
- Joined: Mon Oct 30, 2023 1:17 pm
- Has thanked: 2 times
- Been thanked: 3 times
Re: Create library for the AHT10 sensor
I tested the sensor with real hardware and it worked very well. Thank you to everyone who contributed to this new hardware in the library. It really has great value for money.