ESP32 air mouse project
-
- Posts: 2
- http://meble-kuchenne.info.pl
- Joined: Tue Feb 09, 2021 1:46 am
- Been thanked: 1 time
-
- Valued Contributor
- Posts: 763
- Joined: Wed Dec 02, 2020 10:53 am
- Has thanked: 151 times
- Been thanked: 171 times
Re: ESP32 air mouse project
Hi wavetekken
I know a little about ESP32 and MPU-6050.
You can also use other IMU like MPU6886 or LSM9DS1 both components that flowcode supports well.
For the first test, you must use the Bluetooth Serial Port Profile (SPP).
Bluetooth Low Energy (BLE) is not yet supported, but I hope maybe one day.
Then we can use the HID profile.
Bluetooth control devices can be connected via HID ("Human Interface Device Profile").
You are familiar with these from PCs and games consoles, for example. Controllers, mice and keyboards are just such devices.
They send a signal via HID as to which button you press or how you move the mouse
let me know how you get on.
regards
Stefan
I know a little about ESP32 and MPU-6050.
You can also use other IMU like MPU6886 or LSM9DS1 both components that flowcode supports well.
For the first test, you must use the Bluetooth Serial Port Profile (SPP).
Bluetooth Low Energy (BLE) is not yet supported, but I hope maybe one day.
Then we can use the HID profile.
Bluetooth control devices can be connected via HID ("Human Interface Device Profile").
You are familiar with these from PCs and games consoles, for example. Controllers, mice and keyboards are just such devices.
They send a signal via HID as to which button you press or how you move the mouse
let me know how you get on.
regards
Stefan