Hello Matrix Team,
I´m wondering if it is possible to support ESP32 Bluetooth LE (Low Engergy) master mode.
I would like to sent meas data to a ActivLook smart glasses device.
Protocol specs can be found under the following link:
https://github.com/ActiveLook/Activeloo ... 1-ble-gatt
At my FC9 I only see a slave mode. May I overlooked somthing.
Any tips and advice are welcome.
BR
Dirk
ActivLook smart glasses and ESP32 BT LE
-
- Posts: 89
- http://meble-kuchenne.info.pl
- Joined: Fri Dec 04, 2020 11:03 am
- Has thanked: 6 times
- Been thanked: 12 times
-
- Valued Contributor
- Posts: 1177
- Joined: Thu Dec 03, 2020 10:57 am
- Has thanked: 287 times
- Been thanked: 417 times
Re: ActivLook smart glasses and ESP32 BT LE
Hi Dirk
I believe Benj has "Master Mode" on his list of ESP requests.
Until then, you could probably experiment by using one of the HC-05 Bluetooth modules. These are cheap, easy to use and can be set to Master or Slave. It would allow you to test until an ESP Master becomes available.
Regards
I believe Benj has "Master Mode" on his list of ESP requests.
Until then, you could probably experiment by using one of the HC-05 Bluetooth modules. These are cheap, easy to use and can be set to Master or Slave. It would allow you to test until an ESP Master becomes available.
Regards
-
- Valued Contributor
- Posts: 760
- Joined: Wed Dec 02, 2020 10:53 am
- Has thanked: 150 times
- Been thanked: 171 times
Re: ActivLook smart glasses and ESP32 BT LE
Hi Dirk, Hi Lain
In my opinion, BLE is not yet supported by Flowvode, only "classic BT" with the SPP protocol is already supported,
but the glasses do not work with BT SPP.
I hope soon Flowcode will support BLE.
Then many connections are possible...
regards
Stefan
In my opinion, BLE is not yet supported by Flowvode, only "classic BT" with the SPP protocol is already supported,
but the glasses do not work with BT SPP.
I hope soon Flowcode will support BLE.
Then many connections are possible...
regards
Stefan
Re: ActivLook smart glasses and ESP32 BT LE
Hello guys,
many thanks for good informations and feedback. HC-05 could be a work around, not shure if it support Bluetooth LE.
I would prefere the ESP32 BLE direct way via Bluetooth BLE master GATT component. May a good reason to upgrade to FC10 too.
BR
Dirk
many thanks for good informations and feedback. HC-05 could be a work around, not shure if it support Bluetooth LE.
I would prefere the ESP32 BLE direct way via Bluetooth BLE master GATT component. May a good reason to upgrade to FC10 too.
BR
Dirk
Happy FC9, FC-8 and FC-6 professional user