Hello,
I would like to ask for a little help.
I want to use the MFRC522 component with the ESP32 MCU, but I get a compilation error. I tried to change the component hardware settings in the Properties window, but the situation did not change.
Regards,
Sasi
Compilation error when using MFRC522 component with ESP32.[SOLVED]
-
- Posts: 56
- http://meble-kuchenne.info.pl
- Joined: Wed Dec 02, 2020 12:11 pm
- Has thanked: 22 times
- Been thanked: 7 times
Compilation error when using MFRC522 component with ESP32.[SOLVED]
Last edited by Sasi on Wed May 22, 2024 11:06 am, edited 1 time in total.
-
- Matrix Staff
- Posts: 1491
- Joined: Wed Dec 02, 2020 11:07 pm
- Has thanked: 536 times
- Been thanked: 485 times
Re: Compilation error when using MFRC522 component with ESP32.
Hello Sasi
Many thanks for the bug spot.
ESP32 is being over fussy.
I have fixed the issue.
To try the component.
Browse to this location using file explorer , it's hidden by default so just paste the link into your address bar.
Place the attached component.
If Flowcode is already open, then you will need to reload your project for the new component to work
If you run any component updates, then the component you added will be overwritten, so it will stop working again (unless the component update has been pushed).
Many thanks for the bug spot.
ESP32 is being over fussy.
I have fixed the issue.
To try the component.
Browse to this location using file explorer , it's hidden by default so just paste the link into your address bar.
Code: Select all
C:\ProgramData\MatrixTSL\FlowcodeV10\Components
If Flowcode is already open, then you will need to reload your project for the new component to work
If you run any component updates, then the component you added will be overwritten, so it will stop working again (unless the component update has been pushed).
- Attachments
-
- RFID_MFRC522.fcpx
- (14.41 KiB) Downloaded 36 times
Martin
Re: Compilation error when using MFRC522 component with ESP32.
Hi Martin,
Thank you very much for your help.
Compilation of the program is already working.
Unfortunately the MFRC522 component is not working and I don't know why yet.
Regards,
Sasi
P.S.
Then all of a sudden it started working. It was probably a contact fault. It has been doing its job reliably ever since. Hooray!
Thank you very much for your help.
Compilation of the program is already working.
Unfortunately the MFRC522 component is not working and I don't know why yet.
Regards,
Sasi
P.S.
Then all of a sudden it started working. It was probably a contact fault. It has been doing its job reliably ever since. Hooray!