Good morning
I am using this chip with the TX portion of the UART1 component outputting on pin C6. The RX section, Pin C7, is disabled in the UART properties however it is not usable as a digital output pin. Removing the UART from the program then allows this pin, C7, to operate as expected.
thanks
Pin C7 not working as expected on PIC16F886
-
- Posts: 11
- http://meble-kuchenne.info.pl
- Joined: Mon Oct 24, 2022 12:27 pm
- Location: Cape Town
- Has thanked: 1 time