Good morning. I've just opened a file I haven't used for a while to make a minor change (display background colour). I'm getting undefined tris and port errors reported back. Not sure if this is related to the core up date or not as I haven't used this file for a while. The file compiles in FC9 ok.
N
Compiler erros
-
WingNut
- Posts: 254
- http://meble-kuchenne.info.pl
- Joined: Tue Jul 13, 2021 1:53 pm
- Has thanked: 33 times
- Been thanked: 23 times
Compiler erros
- Attachments
-
- ili9341 spi clock_with temp PCB_no_sd.msg.txt
- (4.15 KiB) Downloaded 33 times
-
Steve-Matrix
- Matrix Staff
- Posts: 1253
- Joined: Sat Dec 05, 2020 10:32 am
- Has thanked: 167 times
- Been thanked: 277 times
Re: Compiler erros
It could be that the pin connections for some of the components have changed. Please check those. Also check your library updates are up-to-date.
If there's still an issue, post your fcfx project (or PM me if it's sensitive) and I will investigate.
If there's still an issue, post your fcfx project (or PM me if it's sensitive) and I will investigate.
-
stefan.erni
- Valued Contributor
- Posts: 758
- Joined: Wed Dec 02, 2020 10:53 am
- Has thanked: 149 times
- Been thanked: 171 times
Re: Compiler erros
Hi WingNut, Hi Steve
I also had to re-enter the pins from the display,
but also remove a component from the hardware SPI channel1 and use the software mode instead
regards
Stefan
viewtopic.php?f=5&t=2059&p=12425#p12425
I also had to re-enter the pins from the display,
but also remove a component from the hardware SPI channel1 and use the software mode instead
regards
Stefan
viewtopic.php?f=5&t=2059&p=12425#p12425