Hello,
I have been testing with GPS, I don't know what it consists of, I have previously made designs that are working to this day with the sending of coordinates, hours, minutes, seconds in real time; but now with flowcode 10 I cannot receive LATITUDE and LONGITUDE, I bought 2 new GPS and I have some used in other tests; Now to avoid failure, use the example published in Flowcode 10 (GPS_TEST) send the LATITUDE, Hour, Minutes and Seconds; If it sends me the Hour: Minutes: Seconds, but the LATITUDE: 0.000000 is not sent; Apparently there is a connection to a satellite, but it does not send the coordinates; On rare occasions I receive LATITUDE and LONGITUDE, but it returns to 0.000000 or the wrong coordinate; Right now I've been waiting for the reading for 3 hours, and it only sent me the time (it takes 2 or 3 minutes to send it); Yesterday I had the circuit on for more than 8 hours and I couldn't get it to send me coordinates; Could you take a look at the GPS component or see what the fault could be ?
I send the example and circuit with reading.
Enrique
GPS not send LAT_LONG
-
- Posts: 83
- http://meble-kuchenne.info.pl
- Joined: Wed Dec 02, 2020 3:59 pm
- Has thanked: 20 times
- Been thanked: 7 times
-
- Posts: 83
- Joined: Wed Dec 02, 2020 3:59 pm
- Has thanked: 20 times
- Been thanked: 7 times
Re: GPS not send LAT_LONG
IMAGEN
- Attachments
-
- LAT3.jpg (45.58 KiB) Viewed 2436 times
-
- LAT1.jpg (48.2 KiB) Viewed 2436 times
-
- LAT.jpg (58.2 KiB) Viewed 2436 times
-
- Posts: 83
- Joined: Wed Dec 02, 2020 3:59 pm
- Has thanked: 20 times
- Been thanked: 7 times
Re: GPS not send LAT_LONG
I disconnected the circuit and reconnected it, it took 5 minutes to send me the time; but LAT I still haven't received the data.
- Attachments
-
- lat4.jpg (48.54 KiB) Viewed 2430 times
-
- Posts: 83
- Joined: Wed Dec 02, 2020 3:59 pm
- Has thanked: 20 times
- Been thanked: 7 times
-
- Posts: 83
- Joined: Wed Dec 02, 2020 3:59 pm
- Has thanked: 20 times
- Been thanked: 7 times
-
- Posts: 83
- Joined: Wed Dec 02, 2020 3:59 pm
- Has thanked: 20 times
- Been thanked: 7 times
-
- Posts: 83
- Joined: Wed Dec 02, 2020 3:59 pm
- Has thanked: 20 times
- Been thanked: 7 times
-
- Posts: 83
- Joined: Wed Dec 02, 2020 3:59 pm
- Has thanked: 20 times
- Been thanked: 7 times
Re: GPS not send LAT_LONG
The circuit has been connected for 7 hours without sending LAT, but the time is sending it without problems.
- Attachments
-
- lat10.jpg (46.04 KiB) Viewed 2421 times
-
- Posts: 681
- Joined: Thu Dec 03, 2020 8:25 pm
- Location: Denmark
- Has thanked: 569 times
- Been thanked: 146 times
Re: GPS not send LAT_LONG
Hi again!
I have change the device to a Pic16f1937 (not big difference) and change the pin config for the display. Get same result as you.
Then I make some test with "buffersize" in Properties for the GPS. Set it from 80 to 50, then it work perfect for me.
Try to change this Hope you get succes?
Br Jorgen
I have change the device to a Pic16f1937 (not big difference) and change the pin config for the display. Get same result as you.
Then I make some test with "buffersize" in Properties for the GPS. Set it from 80 to 50, then it work perfect for me.
Try to change this Hope you get succes?
Br Jorgen
- Attachments
-
- GPS.png (704.81 KiB) Viewed 2398 times
-
- GPS_Lat_Time.fcfx
- (18.76 KiB) Downloaded 156 times