Hi!
Beginning to be frustrated! Suddently lot of display not working, and now, I can´t compile ESP32
Everytime I start a new project with ESP32 Dev I get error. Even If I not add anything in my program????
Any Idea, pls.
Jorgen
ESP Error! SOLVED!
-
- Posts: 615
- http://meble-kuchenne.info.pl
- Joined: Thu Dec 03, 2020 8:25 pm
- Location: Denmark
- Has thanked: 507 times
- Been thanked: 132 times
ESP Error! SOLVED!
- Attachments
-
- ESPaLT.fcfx
- (5.89 KiB) Downloaded 98 times
-
- ESPaLT.msg.txt
- (12.6 KiB) Downloaded 96 times
Last edited by jgu1 on Sat Dec 11, 2021 9:07 am, edited 1 time in total.
-
- Posts: 615
- Joined: Thu Dec 03, 2020 8:25 pm
- Location: Denmark
- Has thanked: 507 times
- Been thanked: 132 times
Re: ESP Error! SOLVED!
Hi Martin!
Thank you for fast reply!
Yes, last evening I try almost everything, couldn´t understand anything, because it has always worked so fine and every time, and
then suddently not. Yesterday I check the COM port setting many time tryed connect and reconnect, could see the port everytime so?.
I can read the compiler text, and read it many time yesterday, and do only understand a little bit of it, so I was glad you could see it comliled fine.
After reading your answer this morning, I start up my FC9 labtop again ad try to program the ESP and wupti, it work, strange but good So now I think yesterday there migth be some "mish mash" with the USB connection but the port still was visible? After restart today this is ok again, anyway now it work, and if I get problems again, I come back Thank´s.
Hopefully Ben soon will fix the display bugs
Nice weekend MArtin...
Br Jorgen
Thank you for fast reply!
Yes, last evening I try almost everything, couldn´t understand anything, because it has always worked so fine and every time, and
then suddently not. Yesterday I check the COM port setting many time tryed connect and reconnect, could see the port everytime so?.
I can read the compiler text, and read it many time yesterday, and do only understand a little bit of it, so I was glad you could see it comliled fine.
After reading your answer this morning, I start up my FC9 labtop again ad try to program the ESP and wupti, it work, strange but good So now I think yesterday there migth be some "mish mash" with the USB connection but the port still was visible? After restart today this is ok again, anyway now it work, and if I get problems again, I come back Thank´s.
Hopefully Ben soon will fix the display bugs
Nice weekend MArtin...
Br Jorgen