Support for the Q20/Q41 family

[DirkB]

Hello;

I have a question. Does FC V11 support the Q20/Q41 family? I’ve purchased every version of Flowcode since V4. I haven’t purchased FC V11 yet, as I get the impression that support for ESPs is now being developed more extensively than for PICs. However, I bought Flowcode as a development environment for PICs, as it was originally advertised. Is the Q20/Q41 family fully supported by Flowcode V11, as stated in the advertising?

Thanks,

Dirk

[Steve-Matrix]

Hi Dirk,

Thanks for your question and for being part of Flowcode's journey for so long!

Current supported chips can be found on this page:
https://www.flowcode.co.uk/embedded/targets/

You can filter for those devices by typing "q2" or "q4" into the textbox at the bottom of the "Device" column. There are several Q20 and Q41 devices supported there.

We will continue to support PIC devices alongside the ESP32 and other families.

[DirkB]

Hi Steve,

Yes, the chips are listed, but they haven't been finalized for support yet. Or did I miss something? Do the chips only work in FC V11? That's why I haven't bought V11 yet.

Best regards,
Dirk

[Steve-Matrix]

...but they haven't been finalized for support yet.

Sorry, but I'm not sure what you mean by this.

[DirkB]

On the "Supported Embedded Devices" page, the Q41 family is listed as supported. In Flowcode V10, however, they are not fully displayed and do not work. Does the Q41 family only work with Flowcode V11?

[Steve-Matrix]

I'm seeing several Q41 chips listed under V10. I am not familiar with this range and do not have any devices here to test with. What are the issues and which devices do you specifically require?