Checking out Flowcode V9, very excited to see ESP32 support.
Playing around with it now, I do understand that it's new and documentation hasn't caught up yet.
Got some ESP32 stuff running in sim but how do I compile to chip?
Thanks...
How to program ESP32?
-
- Posts: 8
- http://meble-kuchenne.info.pl
- Joined: Thu Dec 17, 2020 7:53 pm
- Has thanked: 1 time
- Been thanked: 1 time
Re: How to program ESP32?
Thanks. I viewed the link you sent, I'd already loaded the toolchain.
I can get my test file to compile, but programming fails:
The listed com port in project options is: COM3 (Silicon Labs CP210x USB).
Any ideas?
I can get my test file to compile, but programming fails:
Code: Select all
Done! You can now compile ESP-IDF projects.
Go to the project directory and run:
idf.py build
Usage: idf.py [OPTIONS] COMMAND1 [ARGS]... [COMMAND2 [ARGS]...]...
Try 'idf.py --help' for help.
Error: Invalid value for '-b' / '--baud': flash is not a valid integer
Programming Failed
C:\ProgramData\MatrixTSL\FlowcodeV9\FCD\ESP\Batch\esp32_prog.bat reported error code 0x1
Autoclose turned off
FINISHED
Any ideas?
Re: How to program ESP32?
Yes, the correct programmer port is listed in Project Options: COM3 (Silicon Labs CP210x USB).
I'm using a HiLetGo ESP32S (Works as Node32s in Arduino IDE). I've tried the various ESP options in Flowcode (ESP32S, ESP32_WROOM_32, ESP32_WROVER), all compile but get the same programmer error when trying to upload:
No problem uploading to the same board with the Arduino IDE when Flowcode isn't open.
I'm using a HiLetGo ESP32S (Works as Node32s in Arduino IDE). I've tried the various ESP options in Flowcode (ESP32S, ESP32_WROOM_32, ESP32_WROVER), all compile but get the same programmer error when trying to upload:
Code: Select all
Error: Invalid value for '-b' / '--baud': flash is not a valid integer
Programming Failed
C:\ProgramData\MatrixTSL\FlowcodeV9\FCD\ESP\Batch\esp32_prog.bat reported error code 0x1
-
- Valued Contributor
- Posts: 401
- Joined: Mon Dec 07, 2020 1:00 pm
- Has thanked: 73 times
- Been thanked: 218 times
Re: How to program ESP32?
There is a bug relating to setting the com port.
Please read this post, carefully
viewtopic.php?p=57#p57
Please read this post, carefully
viewtopic.php?p=57#p57