Flow code programme not downloading in E-Block2
-
- Posts: 1
- http://meble-kuchenne.info.pl
- Joined: Sat Nov 13, 2021 1:58 pm
Flow code programme not downloading in E-Block2
When I try to compile and download into Microcontroller the system says that device not detected.
-
- Matrix Staff
- Posts: 1457
- Joined: Wed Dec 02, 2020 11:07 pm
- Has thanked: 513 times
- Been thanked: 473 times
Re: Flow code programme not downloading in E-Block2
Hi, Hamid
Welcome to the Flowocde forums.
First, have you got the E-blocks 2 USB Drivers installed from here?
Can you go into Build ribbon, and select Compiler Options.
Within PIC section, Select E-Blocks.
Make sure Default compiler for the platform C for PIC is ticked ,then select OK
I that does not work then can you post your Flowchart and .msg.txt files, please.
Both files will be within your project folder.
What is the Upstream Eblock you are trying to program?
E.g BL0011 or BL0080?
Welcome to the Flowocde forums.
First, have you got the E-blocks 2 USB Drivers installed from here?
Can you go into Build ribbon, and select Compiler Options.
Within PIC section, Select E-Blocks.
Make sure Default compiler for the platform C for PIC is ticked ,then select OK
I that does not work then can you post your Flowchart and .msg.txt files, please.
Both files will be within your project folder.
What is the Upstream Eblock you are trying to program?
E.g BL0011 or BL0080?
Martin
Re: Flow code programme not downloading in E-Block2
Hi there,
I'm having the same kind of problems with Flowcode 10 and the BL0080 programmer.
I have installed the USB driver and it's visibal in windows configuration.
In Flowcode I have changed the settings like discribed above.
FC shows the following:
Using <E-Blocks> inbuilt settings for linker
Launching the linker/assembler...
C:\Program Files (x86)\Flowcode v10\tools\DoNothing\DoNothing.exe
Using <E-Blocks> inbuilt settings for programmer
Launching the programmer...
C:\Program Files (x86)\Flowcode v10\tools\mLoader\mLoader.exe -chip 16F18877 "D:\Documents\Programmeren\Flowcode\Projecten\PIC16F18800\Flowcode1.hex"
Loading file...
File loaded from...
=> Flowcode1.hex
File sending...
. . . . . . . . . . . . . . . . . . . . . . .
After a long line of dots, nothing happens.
What am I dowing wrong?
Please let me know.
Rinie
I'm having the same kind of problems with Flowcode 10 and the BL0080 programmer.
I have installed the USB driver and it's visibal in windows configuration.
In Flowcode I have changed the settings like discribed above.
FC shows the following:
Using <E-Blocks> inbuilt settings for linker
Launching the linker/assembler...
C:\Program Files (x86)\Flowcode v10\tools\DoNothing\DoNothing.exe
Using <E-Blocks> inbuilt settings for programmer
Launching the programmer...
C:\Program Files (x86)\Flowcode v10\tools\mLoader\mLoader.exe -chip 16F18877 "D:\Documents\Programmeren\Flowcode\Projecten\PIC16F18800\Flowcode1.hex"
Loading file...
File loaded from...
=> Flowcode1.hex
File sending...
. . . . . . . . . . . . . . . . . . . . . . .
After a long line of dots, nothing happens.
What am I dowing wrong?
Please let me know.
Rinie
-
- Valued Contributor
- Posts: 1163
- Joined: Thu Dec 03, 2020 10:57 am
- Has thanked: 287 times
- Been thanked: 415 times
Re: Flow code programme not downloading in E-Block2
Hi
From your message above it looks as though all is OK, but depending on your program it can take a minute or two to complete.
If you post your chart I can see what happens on mine.
Regards
From your message above it looks as though all is OK, but depending on your program it can take a minute or two to complete.
If you post your chart I can see what happens on mine.
Regards