I have flashed the example file: ESP32 Config WIFI from this page: https://www.flowcode.co.uk/wiki/index.p ... etworking) onto a ESP32C3 board.
I see the SSID "FlowcodeWifi' and I can (I think) connect to it on my smartphone.
I seems to have the IP address 192.168.4.2.
But either which URL I type in my browser, there is no webpage that I can find.
I try to load the website 192.168.4.2/index.htm but there is no response.
What am I doing wrong?
Anye help is welcome!
WIKI ESP32 example (WLAN)
-
- Posts: 250
- http://meble-kuchenne.info.pl
- Joined: Tue Dec 08, 2020 5:11 pm
- Has thanked: 75 times
- Been thanked: 52 times
-
- Matrix Staff
- Posts: 1772
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 452 times
- Been thanked: 612 times
Re: WIKI ESP32 example (WLAN)
Hello,
Try using the IP 192.168.4.1 this is usually the IP for the ESP32 host.
Try using the IP 192.168.4.1 this is usually the IP for the ESP32 host.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Re: WIKI ESP32 example (WLAN)
Great! This works, although the IP address I see is 192.168.4.2.
However, what's even stranger is that it doesn't work when I'm at a short distance from the device. Only when I move a few meters away do I get connected.
But all's well that ends well.
Thanks!
However, what's even stranger is that it doesn't work when I'm at a short distance from the device. Only when I move a few meters away do I get connected.
But all's well that ends well.
Thanks!