ADC on 16F18426

Post Reply
Marc-Lepage-AIF
Posts: 3
http://meble-kuchenne.info.pl
Joined: Fri Feb 12, 2021 3:29 pm
Been thanked: 1 time

ADC on 16F18426

Post by Marc-Lepage-AIF »

Hello BEN, Thank's for your help and the update of the library. But sorry the problem is still there , ADC is not implemented ...or maybe I do something wrong...? My prog must take the analog signal on AN2 and send result on com via C0. It's not coming from the electonic as a friend of mine has made a C prog and it works. But i do not want to use any outside prog , all must be done with Flowcode. Could you please have a second look at my problem ? Thank's . Marc
Attachments
ADC_Try_16F18426.fcfx
(13.34 KiB) Downloaded 23 times

User avatar
p.erasmus
Posts: 333
Joined: Thu Dec 03, 2020 12:01 pm
Location: Russia / Россия
Has thanked: 93 times
Been thanked: 65 times

Re: ADC on 16F18426

Post by p.erasmus »

Hi,

Are you sure the micro is running (How do you know that )
Did you try just to write a dummy value to the UART and see if your UART coms are working example, write 3,42V ?
also from your FC chart you use a ADC clock of FOSC/28 thats maybe a bit slow I would use 16.
Regards Peter - QME Electronics

BenR
Matrix Staff
Posts: 746
Joined: Mon Dec 07, 2020 10:06 am
Has thanked: 149 times
Been thanked: 235 times

Re: ADC on 16F18426

Post by BenR »

These two settings in your confguration look incorrect, can you check these settings,
Config.jpg
Config.jpg (47.28 KiB) Viewed 304 times
What values are you getting out the UART? If your not getting anything then maybe worth doing a one second flash test.

https://www.flowcode.co.uk/wiki/index.p ... ED_flasher
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel

Marc-Lepage-AIF
Posts: 3
Joined: Fri Feb 12, 2021 3:29 pm
Been thanked: 1 time

Re: ADC on 16F18426

Post by Marc-Lepage-AIF »

Hi Ben , Hi erasmus,
Thank's both ...find here under the correct setting...
Attachments
16F18426.jpg
16F18426.jpg (131.04 KiB) Viewed 294 times

Post Reply