- Switchs not work.jpg (110.94 KiB) Viewed 1137 times
All Switchs not work
-
- Posts: 85
- http://meble-kuchenne.info.pl
- Joined: Thu Jan 07, 2021 11:28 am
- Has thanked: 3 times
- Been thanked: 4 times
- p.erasmus
- Posts: 434
- Joined: Thu Dec 03, 2020 12:01 pm
- Location: Russia / Россия
- Has thanked: 104 times
- Been thanked: 88 times
Re: All switches do nothing
Hi Please keep one forum post for your switch problem ,posting several most only cause confusion and does not help you getting support faster and secondly how do you think we should know what is your problem if you do not write and small text to explain your problem.
Regards Peter - QME Electronics
-
- Matrix Staff
- Posts: 1747
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 444 times
- Been thanked: 604 times
Re: All switches do nothing
Hello,
Thanks for letting us know.
I'm investigating the problem for you now, it seems to be something specific with the 3D panel.
For now while we solve the problem you could instead use the 2D components on one of the 2D panels.
Thanks for letting us know.
I'm investigating the problem for you now, it seems to be something specific with the 3D panel.
For now while we solve the problem you could instead use the 2D components on one of the 2D panels.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
- Matrix Staff
- Posts: 1265
- Joined: Sat Dec 05, 2020 10:32 am
- Has thanked: 168 times
- Been thanked: 279 times
Re: All switches do nothing
As @p.erasmus said - please don't post the same topic multiple times. I have now merged these topics, but it wastes time that might be better spent investigating the issue.
-
- Matrix Staff
- Posts: 1265
- Joined: Sat Dec 05, 2020 10:32 am
- Has thanked: 168 times
- Been thanked: 279 times
Re: All switches do nothing
We've investigated this issue and found the problem.
The problem occurs because target device you are using does not have a valid PORTA.0 pin and v10 now includes additional checks to ensure port and pins in calculations actually exist. Your project should work if you change the target to one with A0.
Unfortunately it seems the fix requires a new version of Flowcode and we can't simply issue a component fix via the library updates. This will take a little longer to do, but I hope we can have a fix within the next week or so.
In the meantime, please let us know if you find any other issues.
The problem occurs because target device you are using does not have a valid PORTA.0 pin and v10 now includes additional checks to ensure port and pins in calculations actually exist. Your project should work if you change the target to one with A0.
Unfortunately it seems the fix requires a new version of Flowcode and we can't simply issue a component fix via the library updates. This will take a little longer to do, but I hope we can have a fix within the next week or so.
In the meantime, please let us know if you find any other issues.