Professional design application notes

[JohnD]

Hi

we have developed a series of application notes for professionals. 5 on touch/ graphical displays and a couple on PC developer. You can see them here:

https://www.rs-online.com/designspark/user/Matrix%20TSL

Please give us your feedback and let us know what else you would like to see in this series.

regards

john

[stefan.erni]

Hi John

M5stack dial is very good example and also the video I think it is very good.
The simulation works and I'm going to get the right hardware.
It is described in detail.

For me, demos with clearly defined hardware are very useful. You can usually get the hardware and test and practise that way.

Then I saw that one of my STM32 F469 Disco boards is also supported and I tried it with the same BMP file it used in the sample.
Text is working nice on the Display in simulation and in the hardware but ther is no BMP on simulation and also not in the hardware.
But rx/tx lamp is flashing.

regards

Stefan

[JohnD]

hi

tried it too. no joy with bitmap. we will take a look Monday..

john

[medelec35]

Hi Stefan.
Can you try the attached and see if it works any better.
I know you are aware on how to check the component, but for other members who would like to try:
Browse to this location using file explorer , it's hidden by default so just paste the link into your address bar.

Code: Select all

%ProgramData%\MatrixTSL\FlowcodeV10\Components

Place the attached component.
If Flowcode is already open, then you will need to reload your project for the new component to work
If you run any component updates, then the component you added will be overwritten, so it will stop working again (unless the component update has been pushed).

[stefan.erni]

Hi Martin

Perfect!

The XY chart now also works.
The chart looks as if it can only display up to 255 in simulation and hardware

2024-10-15_09-53-08.PNG (41.5 KiB) Viewed 3536 times