Just uploaded the Flowcode testcard 6 demo into my new RolandTech Enhanced gLCD module and noticed the image has colour inversion. The easy fix is to go into the Flowcode properties for the gLCD and change the colour inversion switch from No to Yes (or from Off to On can’t remember exactly now), and recompiled and reprogram. Easy fix BUT should I need to do this? Is there something else Im missing? Just wondering why the module inverts the colours with the demo code as published by Matrix? Anyone have the answer?
Thanks
Charles
gLCD 16bit parallel RolandTech enhanced module colour inversion
-
canary_wharfe
- Posts: 134
- http://meble-kuchenne.info.pl
- Joined: Thu Dec 10, 2020 3:54 pm
- Has thanked: 14 times
- Been thanked: 16 times
gLCD 16bit parallel RolandTech enhanced module colour inversion
< The Flowcode 11 Pro Silicon Chipper >
-
BenR
- Matrix Staff
- Posts: 2202
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 603 times
- Been thanked: 799 times
Re: gLCD 16bit parallel RolandTech enhanced module colour inversion
Hi Charles,
The latest displays have an IPS screen which has an inverted colour. The older version just had a standard LCD which was good but not as nice as the inverted IPS version.
The latest displays have an IPS screen which has an inverted colour. The older version just had a standard LCD which was good but not as nice as the inverted IPS version.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
canary_wharfe
- Posts: 134
- Joined: Thu Dec 10, 2020 3:54 pm
- Has thanked: 14 times
- Been thanked: 16 times
Re: gLCD 16bit parallel RolandTech enhanced module colour inversion
Ah ok. That explains it. Many thanks.
< The Flowcode 11 Pro Silicon Chipper >