Hello,
can you pick up the following sensor?
Adafruit DP310 Precision Barometer
i2c or SPI
Would be nice
Thanks SpeedPic32
Adafruit DP310 Precision Barometer
-
- Posts: 253
- http://meble-kuchenne.info.pl
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
-
- Posts: 253
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
Re: Adafruit DP310 Precision Barometer
Hello
Here are the data.
Features
• Operation range: Pressure: 300 –1200 hPa. Temperature: -40 – 85 °C.
• Pressure sensor precision: ± 0.002 hPa (or ±0.02 m) (high precision mode).
• Relative accuracy: ± 0.06 hPa (or ±0.5 m)
• Absolute accuracy: ± 1 hPa (or ±8 m)
• Temperature accuracy: ± 0.5°C.
• Pressure temperature sensitivity: 0.5Pa/K
• Measurement time: Typical: 27.6 ms for standard mode (16x). Minimum: 3.6 ms for low
precision mode.
• Average current consumption: 1.7 µA for Pressure Measurement, 1.5uA for Temperature
measurement @1Hz sampling rate, Standby: 0.5 µA.
• Supply voltage: VDDIO: 1.2 – 3.6 V, VDD: 1.7 – 3.6 V.
• Operating modes: Command (manual), Background (automatic), and Standby.
• Calibration: Individually calibrated with coefficients for measurement correction.
• FIFO: Stores up to 32 pressure or temperature measurements.
• Interface: I2C and SPI (both with optional interrupt)
• Package dimensions: 8-pin LGA, 2.0 mm x 2.5 mm x 1.0 mm.
• Green Product (RoHS) Compliant
Typical Applications
• Indoor Navigation (floor detection e.g. in shopping malls and parking garages)
• Health and Sports (accurate elevation gain and vertical speed)
• Outdoor Navigation (GPS start-up time and accuracy improvement, dead-reckoning e.g. in tunnels)
• Weather Station('Micro-weather' and local forecasts)
• HDD drivers, (leak rate detection in hard disk drives)
• Drones (flight stability and height control)
Isn't that interesting?
Why don't you write in the forum
if you are interested, just write "I" and that's it.
Greetings to all who read it
Have fun with FC
SpeedPic32
Here are the data.
Features
• Operation range: Pressure: 300 –1200 hPa. Temperature: -40 – 85 °C.
• Pressure sensor precision: ± 0.002 hPa (or ±0.02 m) (high precision mode).
• Relative accuracy: ± 0.06 hPa (or ±0.5 m)
• Absolute accuracy: ± 1 hPa (or ±8 m)
• Temperature accuracy: ± 0.5°C.
• Pressure temperature sensitivity: 0.5Pa/K
• Measurement time: Typical: 27.6 ms for standard mode (16x). Minimum: 3.6 ms for low
precision mode.
• Average current consumption: 1.7 µA for Pressure Measurement, 1.5uA for Temperature
measurement @1Hz sampling rate, Standby: 0.5 µA.
• Supply voltage: VDDIO: 1.2 – 3.6 V, VDD: 1.7 – 3.6 V.
• Operating modes: Command (manual), Background (automatic), and Standby.
• Calibration: Individually calibrated with coefficients for measurement correction.
• FIFO: Stores up to 32 pressure or temperature measurements.
• Interface: I2C and SPI (both with optional interrupt)
• Package dimensions: 8-pin LGA, 2.0 mm x 2.5 mm x 1.0 mm.
• Green Product (RoHS) Compliant
Typical Applications
• Indoor Navigation (floor detection e.g. in shopping malls and parking garages)
• Health and Sports (accurate elevation gain and vertical speed)
• Outdoor Navigation (GPS start-up time and accuracy improvement, dead-reckoning e.g. in tunnels)
• Weather Station('Micro-weather' and local forecasts)
• HDD drivers, (leak rate detection in hard disk drives)
• Drones (flight stability and height control)
Isn't that interesting?
Why don't you write in the forum
if you are interested, just write "I" and that's it.
Greetings to all who read it
Have fun with FC
SpeedPic32
-
- Matrix Staff
- Posts: 1747
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 444 times
- Been thanked: 604 times
Re: Adafruit DP310 Precision Barometer
Hello,
Many thanks for the suggestion, I've bought one of the DPS310 sensor modules now so hopefully will be able to have a go at a component soon.
Many thanks for the suggestion, I've bought one of the DPS310 sensor modules now so hopefully will be able to have a go at a component soon.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
- Posts: 253
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
Re: Adafruit DP310 Precision Barometer
Hello Ben
I think that's great. 3 thumbs up.
Great and thank you
SpeedPic32
I think that's great. 3 thumbs up.
Great and thank you
SpeedPic32
-
- Matrix Staff
- Posts: 1747
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 444 times
- Been thanked: 604 times
Re: Adafruit DP310 Precision Barometer
The sensor arrived today so I'll plug it in and see if I can make any sense out of it
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
- Posts: 253
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
-
- Matrix Staff
- Posts: 1747
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 444 times
- Been thanked: 604 times
Re: Adafruit DP310 Precision Barometer
Hello,
Seems to be working well for me now so I've added the component to the update system.
Seems to be working well for me now so I've added the component to the update system.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
- Posts: 253
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
-
- Posts: 253
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
Re: Adafruit DP310 Precision Barometer
Hi Ben,
Can you post your sample program here.
I can't get the sensor to work.
Thanks
Can you post your sample program here.
I can't get the sensor to work.
Thanks
-
- Matrix Staff
- Posts: 1747
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 444 times
- Been thanked: 604 times
Re: Adafruit DP310 Precision Barometer
Hello,
What target MCU are you using? Might be worth trying software I2C if you're still not having any joy with this.
Here is a simple example file.
Let us know how you're getting on.
What target MCU are you using? Might be worth trying software I2C if you're still not having any joy with this.
Here is a simple example file.
Let us know how you're getting on.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel