Hello?
I'm working on a project using PIC18F47Q10.
ADC is not working.
https://www.matrixtsl.com/mmforums/view ... 76&t=22120
I'm refer to this. AN0 works. AN1 does not work. C is so difficult.
I want to program ADC from icon.
please.
thank you.
ADC Not work PIC18F47Q10
-
- Posts: 179
- http://meble-kuchenne.info.pl
- Joined: Thu Dec 03, 2020 1:43 pm
- Has thanked: 5 times
- Been thanked: 7 times
-
- Matrix Staff
- Posts: 1747
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 444 times
- Been thanked: 604 times
Re: ADC Not work PIC18F47Q10
Hello,
Thanks for letting us know. I've found and fixed a problem which hopefully will improve things for you. If not then please can you post a simple project file showing the problem and I'll investigate further.
Thanks for letting us know. I've found and fixed a problem which hopefully will improve things for you. If not then please can you post a simple project file showing the problem and I'll investigate further.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Re: ADC Not work PIC18F47Q10
Thanks for your interest.
I solved this problem in the manual and the answer to the same problem in FC8. And I just updated the library. We will test it and report the results.
And I'll post how I solved it. And I'll post how I solved it. See the Read_VOL macro.
I solved this problem in the manual and the answer to the same problem in FC8. And I just updated the library. We will test it and report the results.
And I'll post how I solved it. And I'll post how I solved it. See the Read_VOL macro.
- Attachments
-
- Dog_Toilet_Washer1_ADC.fcfx
- (44.04 KiB) Downloaded 113 times