Hi everyone,
Does FC support Internal Can BUS on ESP32? The FC component shows... but does it work?
Cheers,
R
ESP32 Internal CAN Bus Support
-
- Posts: 54
- http://meble-kuchenne.info.pl
- Joined: Wed Sep 08, 2021 10:36 pm
- Has thanked: 26 times
- Been thanked: 11 times
-
- Matrix Staff
- Posts: 1739
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 440 times
- Been thanked: 603 times
Re: ESP32 Internal CAN Bus Support
Hello,
Yes it should be working, I'm not sure if it's been tested but there is certainly code there to drive the internal CAN peripheral.
Yes it should be working, I'm not sure if it's been tested but there is certainly code there to drive the internal CAN peripheral.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
- Posts: 54
- Joined: Wed Sep 08, 2021 10:36 pm
- Has thanked: 26 times
- Been thanked: 11 times
Re: ESP32 Internal CAN Bus Support
Many thanks Ben for this,
Will give a try to see if the interface works at all... Do you think RX CAN Interrupt can be implemented in Flowcode?
Thanks,
R
Will give a try to see if the interface works at all... Do you think RX CAN Interrupt can be implemented in Flowcode?
Thanks,
R