Been developing a program for the 18F2455 using flowcode 6 and it had been going well. Gone through about 10 saved versions as I progressed and up until now all compiled and built on chip and worked to an improving degree.
Then I started getting compile errors of 'could not open' xc.h and math.h. At first I thought I had screwed up the program but have gone back to earlier versions of the programs which used to compile ok and work but now get the same error.
I can not find XC.h, but no idea what's going on or how to recover.
Can anyone help please?
Compile error missing XC.h & math.h Flowcode 6
-
PamB
- Posts: 1
- http://meble-kuchenne.info.pl
- Joined: Tue Dec 14, 2021 11:01 pm
-
medelec35
- Matrix Staff
- Posts: 1917
- Joined: Wed Dec 02, 2020 11:07 pm
- Has thanked: 621 times
- Been thanked: 645 times
Re: Compile error missing XC.h & math.h Flowcode 6
Hi.
These forums are for V9 ad onwards when released.
The forums you require are on our other site
Unfortunately, V6 is no longer officially supported, but they may be members that will help.
You will need to post your Flowchart and msg.txt file on the other forums, within the Flowcode v6 section.
These forums are for V9 ad onwards when released.
The forums you require are on our other site
Unfortunately, V6 is no longer officially supported, but they may be members that will help.
You will need to post your Flowchart and msg.txt file on the other forums, within the Flowcode v6 section.
Martin