Pickit 3 programing issues

[Chadb]

Thanks for that! I'll give that a try after work.

Chad

[Chadb]

Hi Martin,

Sorry about the delay, got a big project and just got busy.

That worked. It still gives a memory error. but it does program and run after i set the config bits.

So was it a mismarked chip or is it something in FC?

Anyway, now back to the project.

Thanks,
Chad

[medelec35]

Hi.
At least you are now able to program, which is the main thing.
No, it's not a Flowcode issue, it's down to Microchip as they would have printed and programmed the device ID

[Chadb]

After a little time with it, the file you made has some problem with one of the ports on the chip. Maybe FC can do a fix and get it up to snuff.

But at least now I can talk to it.

Thanks again!

Chad
p.s. how many times do I need to post before they don't need to be manually verified?

[medelec35]

Hi.
You're welcome.
What port are you having an issue with?
Your posts should no longer require verification.
If they do, then I will send an email to a colleague to get it sorted for you.

[Steve-Matrix]

p.s. how many times do I need to post before they don't need to be manually verified?

Hopefully I've sorted this for you now. Normally, a new user is allowed to post without requiring moderator approval after 3 posts (I think). This should be automatic but for some reason it didn't happen to your account.

[Chadb]

Hi martin, I was testing with a led strip and for some reason it wouldn't let me pick pin 1. I had to move it to pin 11 I think. I have been super busy and haven't played with it lately. I have some time and will be getting back into it. Usually what happens is I get inspired to do something then I run into a problem like this and by the time I get it going I lost the motivation that got me gong in the first place. Add to that fact that I had to reinstall everything after a , dragged kicking and screaming to update my machine from win 7 to 10. Then i couldn't get my pickit 4 to work and had to dig for my pickit3...
I also am not getting email reminders that there is a new response from here. I have been through my settings and it has my email but can't find a switch to get emails on new posts. Being in the states there is usually a day lag in responses...

Anyway I am going to get back to it here for a bit so I will probably have some more questions.

Thanks for your help.

Steve: I'll let you know if I still have the post auth thing.

Chad

edit* post went through
edit** I just opened the project again and this time it let me pick the original pin I was using.?