Hi Leigh
I have previously deleted the MPU6886 so that there are no problems but I did not posted it,sorry.
I changed the code, Insert the {0} and there is no more error message. Very good!
I2C hardware works now.
Unfortunately I still read always the same values from the BME688 for humidity and temperature:
177.384328
33.551110
regards
Stefan
BME688 ESP32 ESP8266 Rasberry PI AVR
-
- Valued Contributor
- Posts: 771
- http://meble-kuchenne.info.pl
- Joined: Wed Dec 02, 2020 10:53 am
- Has thanked: 151 times
- Been thanked: 173 times
-
- Valued Contributor
- Posts: 401
- Joined: Mon Dec 07, 2020 1:00 pm
- Has thanked: 73 times
- Been thanked: 218 times
Re: BME688 ESP32 ESP8266 Rasberry PI AVR
Hi Stefan,
Thanks for the update. Glad to hear the hardware I2C now works.
Your reading issue probably needs a look at the datasheet, which I can't help with just at the moment.
Ben,
Looks like ESP has some additional flags into the struct, so the CAL mod will fix this for newer installs, and be backwards compatible.
Cheers,
Leigh
Thanks for the update. Glad to hear the hardware I2C now works.
Your reading issue probably needs a look at the datasheet, which I can't help with just at the moment.
Ben,
Looks like ESP has some additional flags into the struct, so the CAL mod will fix this for newer installs, and be backwards compatible.
Cheers,
Leigh
-
- Matrix Staff
- Posts: 1763
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 448 times
- Been thanked: 609 times
Re: BME688 ESP32 ESP8266 Rasberry PI AVR
Thanks Leigh, I've made the change you recommended here and rolled it out now.
Much appreciated
Much appreciated
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
- Valued Contributor
- Posts: 771
- Joined: Wed Dec 02, 2020 10:53 am
- Has thanked: 151 times
- Been thanked: 173 times
Re: BME688 ESP32 ESP8266 Rasberry PI AVR
Hi Ben
With the BME688 is still a small problem.
I can always read the exact same values..
Do I have to do something else than init and read values?
regards
Stefan
With the BME688 is still a small problem.
I can always read the exact same values..
Do I have to do something else than init and read values?
regards
Stefan
ga=6400000.095367
hu=177.384328
pr=768.309887
te=33.551110