dear Ben,
release/v5.0 installed
Should I test it on Flowcode or wait your next message?
ESP32-S2 FCDX request
-
- Posts: 177
- http://meble-kuchenne.info.pl
- Joined: Thu Sep 23, 2021 3:44 pm
- Location: France
- Has thanked: 31 times
- Been thanked: 22 times
-
- Matrix Staff
- Posts: 1882
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 484 times
- Been thanked: 661 times
Re: ESP32-S2 FCDX request
Hi Seb,
It's not currently working due to the I/O problems I've discovered. I'll try and make more progress on this soon, hopefully tomorrow.
It's not currently working due to the I/O problems I've discovered. I'll try and make more progress on this soon, hopefully tomorrow.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
- Posts: 177
- Joined: Thu Sep 23, 2021 3:44 pm
- Location: France
- Has thanked: 31 times
- Been thanked: 22 times
Re: ESP32-S2 FCDX request
Hi Ben,
thx for your feedback.
Indeed, I did compilation test with V5.0 and failed.
However, install new a IDF version with command below is working well.
idf_tools.py uninstall was not working for me because my directories are not same as yours
To switch back to 4.1 version,
First need to update Git because switch command was introduced in version 2.23 as an attempt to simplify the process.
Now the current git version is 2.39.0
then, like you said, following command can be used
I did a lot of testing and compilation after reverting to version 4.1, it work very well to switch between versions.
like you said,
To check ESPTOOL version installed. Last version is 4.4
Thx
thx for your feedback.
Indeed, I did compilation test with V5.0 and failed.
However, install new a IDF version with command below is working well.
Code: Select all
git fetch
git checkout release/v5.0
git pull
git submodule update -f --init --recursive
install.bat
idf_tools.py uninstall from esp-idf\tools\ directory
idf_tools.py uninstall --remove-archives from esp-idf\tools\ directory to remove also archives
First need to update Git because switch command was introduced in version 2.23 as an attempt to simplify the process.
Code: Select all
git update-git-for-windows
then, like you said, following command can be used
Code: Select all
git switch -f release/v4.1
Code: Select all
git fetch
git checkout release/v4.1
git pull
git submodule update -f --init --recursive
install.bat
like you said,
To check idf,Git and python versionFor existing projects you will have to remove the cache directory located in the same folder as the Flowcode project file to force a complete recompile.
Code: Select all
idf.py --version
git --version
python -–version
Code: Select all
pip3 show esptool
Seb
-
- Matrix Staff
- Posts: 1882
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 484 times
- Been thanked: 661 times
Re: ESP32-S2 FCDX request
Hi Seb,
Sorry I've been trying to get a few projects off my desk before the holidays, I started to look into this one and the IO problem currently has me stumped. We could just call the public IO functions but these were very slow compared with accessing the registers directly. Something in the IDF has changed to do with the IO registers and I don't want to go backwards in terms of speed/efficiency so I'll keep chipping away at it. Hopefully have more news for you shortly.
Sorry I've been trying to get a few projects off my desk before the holidays, I started to look into this one and the IO problem currently has me stumped. We could just call the public IO functions but these were very slow compared with accessing the registers directly. Something in the IDF has changed to do with the IO registers and I don't want to go backwards in terms of speed/efficiency so I'll keep chipping away at it. Hopefully have more news for you shortly.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
- Matrix Staff
- Posts: 1882
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 484 times
- Been thanked: 661 times
Re: ESP32-S2 FCDX request
Hello,
I'll have another crack at this tomorrow, hopefully making some progress now but there's lots on atm so having to divide my time.
I'll have another crack at this tomorrow, hopefully making some progress now but there's lots on atm so having to divide my time.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
- Matrix Staff
- Posts: 1882
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 484 times
- Been thanked: 661 times
Re: ESP32-S2 FCDX request
Hello Seb,
Sorry I've put this on hold for the moment as we are launching Flowcode v10 very soon and there are a few tasks that need to be completed. As soon as this is out the way I'll have some more time to properly investigate this for you.
Sorry I've put this on hold for the moment as we are launching Flowcode v10 very soon and there are a few tasks that need to be completed. As soon as this is out the way I'll have some more time to properly investigate this for you.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel