Thanks for your post, Jorgen. Some answers are below:
jgu1 wrote: ↑Wed Nov 05, 2025 5:43 pm
* In Flowcode 11, are the same components used as in Flowcode 10, or are we starting over with new ones (and possibly new bugs)?
With v11, we start by making direct copies of the v10 components. We have been using the v10 components with v11 for a while internally and we hope any v11-specific bugs have been caught.
Over time, the v11 components will receive updates and fixes. Some of these will be applied to the equivalent v10 components, but over time we will do this less.
jgu1 wrote: ↑Wed Nov 05, 2025 5:43 pm
* Are the same ToolChains used in Flowcode 11, or do I need to install them again?
The toolchains are the same. You should not need to reinstall them, but you will probably need to tell Flowcode where these toolchains are. There is a tab in Global Options for this and you should edit it to show the same information as v10.
jgu1 wrote: ↑Wed Nov 05, 2025 5:43 pm
* In FC10 the Arduino Nano 328 115200 is available but not in FC11, only Arduino Nano 328 (cheap one). Is this now working for both?
That might be an oversight - we'll look into it.
jgu1 wrote: ↑Wed Nov 05, 2025 5:43 pm
* In my current Flowcode 10 installation, after downloading the latest ESP Toolchain, it installed IDF 5.3, which prevents me from compiling the ESP32 C models. Will I be able to use the C models in Flowcode 11?
There should be other ESP threads on these forums that should help get those devices supported.
jgu1 wrote: ↑Wed Nov 05, 2025 5:43 pm
* Can I open and continue project wich I have started in FC10?
Yes - v10 projects should open in v11 without problem.
[Edit: Just to expand on this, while most v10 projects will open and function just fine in v11, there will occasionally be cases where this is not the case. There are many changes in the core product between v10 and v11 and we have done our best to test backwards compatibility, we cannot individually test everyone's v10 projects and identify all issues that may arise. And although the vast majority of v11 components are direct copies of v10 code, there may be some changes that I am personally not aware of and so no-one should take my original answer above as a guarantee that a v10 project will work 100% in v11 without some modest changes. It is always best to try v11 first, and using the free version of v11 should in many cases highlight where there may be issues. As normal, we will provide help and advice on this forum for any v10 project that is not working the same in v11.]
Sometimes, v11 projects will open ok in v10. But if you have edited in v11 and used some of the new features in v10 then there could be problems.
jgu1 wrote: ↑Wed Nov 05, 2025 5:43 pm
* If I purchase the upgrade now, is the current price the final one, or is there a chance of additional discounts as we approach Black Friday
?
We have no Black Friday plans for additional discounts that I am aware of.
