Hello Ben,
I am having issue to get going with the new DSP PI and PID component (used it many times in V7 and V8)
I have two digital values Setspeed and Actual Speed which is my Set and Feed back signals ( as they come over CAN they are numerical values in RPM)
I connect these two values to the PI Component by a Digital Input icon as below however my issue is how to extract the output from the PI component
I use the Process(macro) but I do not see any way to get the value, I also try to use a Digital output but I cannot connect the Digital output to the PI Components.
What am I doing wrong or do not understand Please help as always it isappreciated
my Fc chart trying to get it going
DSP PI Controller
- p.erasmus
- Posts: 434
- http://meble-kuchenne.info.pl
- Joined: Thu Dec 03, 2020 12:01 pm
- Location: Russia / Россия
- Has thanked: 104 times
- Been thanked: 88 times
-
- Valued Contributor
- Posts: 798
- Joined: Wed Dec 02, 2020 10:53 am
- Has thanked: 157 times
- Been thanked: 185 times
Re: DSP PI Controller
Hi Peter
You have done nothing wrong.
Look here, I think Ben will fix it soon
viewtopic.php?f=5&t=777
Greetings from snowy Switzerland
Stefan
You have done nothing wrong.
Look here, I think Ben will fix it soon
viewtopic.php?f=5&t=777
Greetings from snowy Switzerland
Stefan
-
- Matrix Staff
- Posts: 1786
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 455 times
- Been thanked: 621 times
Re: DSP PI Controller
Hello,
Sorry about this, hopefully solved for you now.
Sorry about this, hopefully solved for you now.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
- Valued Contributor
- Posts: 798
- Joined: Wed Dec 02, 2020 10:53 am
- Has thanked: 157 times
- Been thanked: 185 times
Re: DSP PI Controller
Hi Ben
Thanks a lot.
Can you have a look to this program, I testet all and maybe there are few more to fix
regards
Stefan
Thanks a lot.
Can you have a look to this program, I testet all and maybe there are few more to fix
regards
Stefan
- p.erasmus
- Posts: 434
- Joined: Thu Dec 03, 2020 12:01 pm
- Location: Russia / Россия
- Has thanked: 104 times
- Been thanked: 88 times
Re: DSP PI Controller
Ben.
Thanks a million the fix work for my situation however Stefan is corrcet there are a couple more that the Digital output cannotconnect too
Thanks a million the fix work for my situation however Stefan is corrcet there are a couple more that the Digital output cannotconnect too
Regards Peter - QME Electronics
-
- Matrix Staff
- Posts: 1786
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 455 times
- Been thanked: 621 times
Re: DSP PI Controller
Aha excellent thanks for that they all work here but I delayed pushing them out to the update system to confirm everything was ok and now they are no longer flagged as needing pushing.
I'll get these pushed out for you now.
I'll get these pushed out for you now.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel