Potentiometer not acting as analogue input
-
Mikeatukstemdotuk
- Posts: 7
- http://meble-kuchenne.info.pl
- Joined: Thu Sep 08, 2022 10:44 am
Re: Potentiometer not acting as analogue input
Ok, sorry about that. Here you are...
- Attachments
-
- Flowcode1.fcfx
- (11.89 KiB) Downloaded 60 times
-
Mikeatukstemdotuk
- Posts: 7
- Joined: Thu Sep 08, 2022 10:44 am
Re: Potentiometer not acting as analogue input
And this one works fine in the simulator, but on Arduino the output on Pin 5 stays high 
- Attachments
-
- Flowcode2.fcfx
- (10.06 KiB) Downloaded 56 times
-
medelec35
- Matrix Staff
- Posts: 1924
- Joined: Wed Dec 02, 2020 11:07 pm
- Has thanked: 623 times
- Been thanked: 645 times
Re: Potentiometer not acting as analogue input
Hello
I have just looked at your Project and the issue is what I have linked to in
I have just looked at your Project and the issue is what I have linked to in
Martin
-
Mikeatukstemdotuk
- Posts: 7
- Joined: Thu Sep 08, 2022 10:44 am
Re: Potentiometer not acting as analogue input
Hi, after reading some other posts on this issue I finally got it cracked - it's not very intuitive! Anyway, I'm there now, if I get stuck again I'll post.
Cheers
Cheers