1.5inch RGB OLED Module

Post here to discuss any new features, components, chips, etc, that you would like to see in Flowcode.
Post Reply
SpeedPIC32
Posts: 261
http://meble-kuchenne.info.pl
Joined: Thu Dec 10, 2020 2:35 pm
Has thanked: 36 times
Been thanked: 17 times

Flowcode v10 1.5inch RGB OLED Module

Post by SpeedPIC32 »

Hello,

I have the following request
I urgently need a driver for this controller SSD1351 Specification Operating voltage: 3.3V/5V(Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly) Support interface: 4-wire SPI, 3-wire SPI Controller: SSD1351 Resolution: 128(H)RGB x 128(V) Dimension: 26.855（H）x 26.855（V）mm Pixel size: 0.045(H) x 0.194(V) mm Display color: 65K color: 0.005(V)
https://www.waveshare.com/wiki/1.5inch_RGB_OLED_Module
with kind regards
SpeedPic32
22-06-2024 14-16-45.jpg
22-06-2024 14-16-45.jpg (26.99 KiB) Viewed 3860 times
1.5inch_rgb_oled_module.png
1.5inch_rgb_oled_module.png (474.45 KiB) Viewed 3860 times
Top
BenR
Matrix Staff
Posts: 1924
Joined: Mon Dec 07, 2020 10:06 am
Has thanked: 501 times
Been thanked: 684 times

Re: 1.5inch RGB OLED Module

Post by BenR »

Hello,

We have a component for the SSD1351 already which should work fine. If you have any problems then let us know and we will investigate.
Display.jpg
Display.jpg (13.38 KiB) Viewed 3838 times
Connect the Flowcode RS pin to the pin marked DC.


We've recently been working on this wiki page with lots of useful GLCD related information https://www.flowcode.co.uk/wiki/index.php?title=GLCD
Top
Post Reply

Return to “Feature Requests”